Create your AI Cum Slut -70% for Mother's Day
x

Fan Art 3D-Mixed 3D Bestiality

K

killer12asdrtwete

Member
Sep 12, 2021
146
99
D

Deleted member 6861716

Member
Dec 28, 2023
415
2,199
View attachment 3410528
goodbad1 said:
Longpost incoming, sorry guys :)

About changing the figure to make gens look more realistic...

First of all, I recommend getting some basic knowledge about real canine intercourse, and how male gens are working. That is, of course, if You want to make renders (at least partially) realistic. Imo - I think that many besti fans are expecting it.
So - shaft almost never bends, knot is bulging just before ejaculation (not before intercourse), and whole thing is connected to more flexible tissue, that is why shaft can be bent in all directions. And Knot =/= balls :) (I've seen renders where knot were "getting out" from sack)

Please don't be offended if You think I'm "captain obvious" here - but I've seen some anatomically bad renders, I've done terrible renders myself :)

How I made it, step by step. First I will just name the steps, and then we will go through details.

1. Change morphs
2. Add Bone
3. Add Face Group
4. Add Weight Map
5. Move and Rotate the Bone

1. The place where shaft is connected to body is quite close to scrotum. So when gens are in full erection mode, whole shaft leaves the fur coating. So to simulate that, we need to remove original coating from Dog 8.
To do that, simply change Female morph.
Female Morph --> 100%

But we still want the Dog to have balls, so remove limits from Neutered morph.
You don't have permission to view the spoiler content. Log in or register now.

and give it -100%. That will bring back balls. Lowering the value even more will just make balls bigger, so You can adjust them to Your preference.
Neutered Morph --> -100%
You don't have permission to view the spoiler content. Log in or register now.



2. Now more difficult things. Stay motivated :)
We need to add bones. The number of bones is just a matter of Your needs. We can start with just one bone. After You will learn how to do that, You can add more if You want.

In this case, we need to add bone that will be a child bone to pelvis, so the bone will always stay with it. You need to add Tool Settings pane.
You don't have permission to view the spoiler content. Log in or register now.

Select Joint Editor, and select pelvis in Dog figure in Scene pane.
You don't have permission to view the spoiler content. Log in or register now.

Then click on Menu Icon, and add Child Bone.
You don't have permission to view the spoiler content. Log in or register now.

Name it as You want, say "Gen1", and select Rotation Order the same as parent bone (Pelvis has ZYX).
You don't have permission to view the spoiler content. Log in or register now.

Now You can see the Center Point and End Point configuration panel.
You don't have permission to view the spoiler content. Log in or register now.

Center Point is the place where our new body part will be rotating around, and End point is kinda like the tip. So position Center Point somewhere above the selected place, and End Point just beneath Center Point. Don't worry about shape of the bone yet, focus only on red and green point. Do not touch X, just move points by Y and Z.
In the screen, You can see that I turned off visibility of both Haunches, to make life easier :)
You don't have permission to view the spoiler content. Log in or register now.

After both points are in place, click Menu Icon, and Align, and Align Node.
You don't have permission to view the spoiler content. Log in or register now.

Now You can see how the bone is oriented.
You don't have permission to view the spoiler content. Log in or register now.



3. We have our bone, but it's not doing anything yet. Two more steps. First - change tool from Joint Editor do Geometry Editor.
You don't have permission to view the spoiler content. Log in or register now.

Now select polygons You want to "make" our base for gens. The more You will select, the bigger the base will be. At first try to make it more less the size of what You can see in the example. Hold CTRL to add more polygons, hold ALT to remove single polygon.
You don't have permission to view the spoiler content. Log in or register now.

After selecting what You want, right click on selected polygons, go to Geometry Assignment, then Create Face Group From Selected.
You don't have permission to view the spoiler content. Log in or register now.

Name the Face Group (for example "Gen1_group").
You don't have permission to view the spoiler content. Log in or register now.

Now go back to Joint Editor for a while, choose Gen1 bone, and add Gen1_group to it.
You don't have permission to view the spoiler content. Log in or register now.

We are almost there!

4. Last thing. We have our bone, we have the area that "belongs" to bone, but now we need to mark the area that will be affected by movement of the bone. To do that, go do Node Weigh Map Brush tool.
You don't have permission to view the spoiler content. Log in or register now.

In figure, select new bone. Below, click on General Weights.
You don't have permission to view the spoiler content. Log in or register now.


Right click on the Dog in Viewport, Geometry Selection, and clear the selection.
You don't have permission to view the spoiler content. Log in or register now.

Now right click again, Geometry Selection, Select by face group, and select the Gen1_group.
You don't have permission to view the spoiler content. Log in or register now.

This will select the whole group again. Now again - right click, Weight Editing, Fill selected.
You don't have permission to view the spoiler content. Log in or register now.

For starters just use default value or 100%.
You don't have permission to view the spoiler content. Log in or register now.

You can now see that the area is colored.
You don't have permission to view the spoiler content. Log in or register now.


Guess what? That is all! :)

You can change the Tools pane to Parameters again, and Tool from Brush to something else (here - Universal). Now, it the parameters, select the new bone, and move it. If You will move it down the Y axis, the part You have created will now stick out of the Dog.
You don't have permission to view the spoiler content. Log in or register now.

You can move it in all directions, You can also change the Scale and Rotate it, to make it look as You want it to be.
You don't have permission to view the spoiler content. Log in or register now.

If You were reading my older posts, now You know why I was saying that Dog 8 loin area is having too big polygons. Our newly created gens base is just... boxy. It's not perfect, not even close. But with enough wiggling, rotating, scaling, You can make something that will be looking kinda OK. Especially when it will be later covered with Fur, and K9 (or other gen figure will be in place). If You are using K9, it's also good to scale down the base, to fit better.

All this work, including positioning of K9 and trying to make it match nicely, took me less than 5 minutes. I'm sure that it will take longer if You are making such things for the first time, but I'm sure that if you will make it 3-4 times, You will be doing that equally fast.

Final result of this very quick work looks like that:

View attachment 541913

View attachment 541914



Next step is to make two bones - first bigger one, for whole body part, and another one (child to the first one, not to pelvis) very small bone that will be a tip of the new part. That will give You more options in customizing it.

Or something else :) Maybe someone will start from this and then achieve much better results than mine. I hope!

I hope at least one person will try to do it and all my work will not be completely useless. Making new body part took me 5 minutes, but this post is almost an hour now :)
Click to expand...
I took the easy way of using a mesh grabber and parent the K9 COR-COCK to the pelvis bone then "mesh grabbed" the enlarged "furry fake cock's mesh" and MADE IT SHORTER AND CLOSE TO THE STOMACH into a fusion with my K9 COR-COCK with the purpose of covering the ugly base and reveal only from the K9'S "knot" and above to the shaft and glands. Making tests from flaccid to erect and playing with sizes, made the final adjustments. here is a small "gif like" video! Now we can have the original "enlarged male balls" and a working K9 COR COCK securely attached on the pelvis bone plus whenever we like our dog's "decent" appearance with just a "click" on our Scene set up on Daz3d interface we can make invisible the K9 COR COCK. Thanks for the inspiration!
You can watch it on this link
https://f95zone.to/threads/becoming...a-game-developer-journal.187859/post-13123981
 
Last edited:
  • Like
Reactions: Banality
redharvest1

redharvest1

Well-Known Member
Jun 7, 2019
1,121
3,874
It wasn't until the director brought out her co-star that Christy discovered exactly why the casting director had offered her three times the going rate to star in this particular bondage film.

Despite her desperate protests and demands to be untied the shoot went as scheduled... for several hours.

99.jpg
 
  • Like
  • Heart
Reactions: buddy86, Precox, Kass69 and 6 others
J

Jaanbauer

New Member
Mar 19, 2024
2
1
goodbad1 said:
Este tópico está bastante ativo ultimamente, muito bom:)

Eu postaria algumas fotos, mas primeiro - estou impaciente e geralmente paro a renderização no início ("Farei uma renderização melhor mais tarde") porque já tenho uma ideia nova em mente.
Sinto muito pela má qualidade. Vou trabalhar melhor... mais tarde:)

You don't have permission to view the spoiler content. Log in or register now.
[/CITAR]
Nota 10
Click to expand...
 
  • Like
Reactions: Hondo22
Mopsi

Mopsi

Member
Nov 19, 2020
294
2,995
bogumil said:
Is this yours?
Do you have more of this story?

I love it.
Photoshoot is my favourite setting for beast theme.
Hot blonde dominated by dog on camera.
Click to expand...
Yes, these are my own pictures. At the moment I only have the three pictures that I posted here.
 
You must log in or register to reply here.
Top Bottom