fan control percentage help with the new corsair commander pro

[rayminator]

fan control percentage help with the new CORSAIR iCUE Commander CORE XT

I need to change the fan speed to percentage from 0% to 100%

800rpm = ?%
900rpm = ?%
1120rpm = ?%
1220rpm = ?%
1520rpm = ?%
2500rpm = ?%

if can someone can help it would be great

 

[Pamphlet]

I might be having a hard-of-thinking moment but I'm not quite sure what you're going for, so I'll go for a bit of a scatter-gun reply.

Quite often the controllable range of fans starts at 20% PWM, though it can vary - best to look up the specs of your particular fans, which should give you a suitable graph. I wouldn't really trust just doing the maths and hoping to hit particular speeds, it's generally simplest to use the fixed speed setting and adjust by hand if you want to find any given rotation rate. All that said, I'd just go for an auto-setup at first and tweak from there over time.

 

[rayminator]

the old commander pro fan curve uses the rpms and the newer one uses % percent as a fan speed.
the numbers above are from my old command pro

 

[Pamphlet]

Ah, right. Yeah, for that it's likely easiest to manually adjust to those measured speeds and note down the percentage settings for them. Unless you're still in a position to export the old profile and re-import it, which might handle it for you.