[Stable Diffusion] Prompt Sharing and Learning Thread

[Synalon]

Maybe you would show me exampls? I'm having a hard time installing reactor if you would show me some examples and it works I'll install it somehow.

What UI are you trying to install it on?

 

[deadshots2842]

Auto1111

 

[Synalon]

Auto1111

It should be pretty easy to install. but if installing it from within A1111 isn't working for you just install from url its what I always do.

 

[deadshots2842]

It should be pretty easy to install. but if installing it from within A1111 isn't working for you just install from url its what I always do.

Insighface distribution was not found and is required by the application
I'm getting this error I have installed stable diffusion in D drive is that a reason I'm getting this?

And also getting " no module named insightface. App

And ask I have installed roop and insight face and still getting this install Reactor from auto1111 and still this problem

 

[deadshots2842]

It should be pretty easy to install. but if installing it from within A1111 isn't working for you just install from url its what I always do.

Now it say this..lol

 

[devilkkw]

remove version and install: pip install insightface
but if you are in a1111 with venv, you need to activate venv before install.
after done edit your bat files and add "--skip-install" "--skip-prepare-environment" in set COMMANDLINE_ARGS.

 

[deadshots2842]

remove version and install: pip install insightface
but if you are in a1111 with venv, you need to activate venv before install.
after done edit your bat files and add "--skip-install" "--skip-prepare-environment" in set COMMANDLINE_ARGS.

Now?? Even when I install project do I have to install poetry or something like that too?

 

[osanaiko]

Now?? Even when I install project do I have to install poetry or something like that too?

Bro, none of this stuff you are using comes from a commercial project. The whole automatic1111 toolset and all the plugins etc are just some "Anon"s volunteering their time and efforts to put a relatively usable front end on the free Stable Diffusion models released by StabillityAI. They are just anon hackers who are sharing cool tech with the rest of the world for free.

 

[deadshots2842]

Bro, none of this stuff you are using comes from a commercial project. The whole automatic1111 toolset and all the plugins etc are just some "Anon"s volunteering their time and efforts to put a relatively usable front end on the free Stable Diffusion models released by StabillityAI. They are just anon hackers who are sharing cool tech with the rest of the world for free.

I'm taking about pyproject.toml that's giving me error. I'm always getting some kind of error when I'm trying to install Reactor lol. This is why I'm asking people for example photo of how good this extension is so I can decide if it's worth all this trouble.

 

[Sharinel]

I'm taking about pyproject.toml that's giving me error. I'm always getting some kind of error when I'm trying to install Reactor lol. This is why I'm asking people for example photo of how good this extension is so I can decide if it's worth all this trouble.

I have no idea what that file is, I installed reactor from within Auto1111, and pressed the button to apply and restart, and that was it. Literally 1 button press to install - check the bottom of the screenshot. I have no idea what you're doing to get that file showing as not working. Did you install it from the 'install from URL' tab?

 

[deadshots2842]

Getting this now. Looks like the final problem I'll face everything seems to work other then this.

 

[devilkkw]

Now?? Even when I install project do I have to install poetry or something like that too?

The problem seem a compile error, and reading location of your buildtool, it's in program files, so try to run process with admin right. or compile it manually (i had same problem with cuda dll) or find precompiled version on the web.

 

[deadshots2842]

The problem seem a compile error, and reading location of your buildtool, it's in program files, so try to run process with admin right. or compile it manually (i had same problem with cuda dll) or find precompiled version on the web.

Solved that part I think now I'm seeing problem from above image.

 

[deadshots2842]

I did get it to work but result are lower then expected. Maybe any tips to improve my result anyone?

 

[theMickey_]

I did get it to work but result are lower then expected. Maybe any tips to improve my result anyone?

Post your "before" and "after" images as well as the face you're using to replace the original face, and post your workflow, too (sorry, but I'm a ComfyUI user, but I guess something similar to a "workflow" exists in Auto1111 as well...?!). It's impossible to tell you how to do it properly without knowing what you actually did.

 

[deadshots2842]

Post your "before" and "after" images as well as the face you're using to replace the original face, and post your workflow, too (sorry, but I'm a ComfyUI user, but I guess something similar to a "workflow" exists in Auto1111 as well...?!). It's impossible to tell you how to do it properly without knowing what you actually did.

Here.

 

[theMickey_]

Here.

To be honest -- I'm not sure what you've posted there. I asked you to post a "before" and "after" image, but it seems like you only posted a picture of your "text2img" generated image and the model you want to use the face of -- but not the final result. I can't see any face swap in the images you've posted.

Here's what you should have posted instead if you want any help on how to improve your outcome:

1) Image created by txt2img (this is just a quick and dirty ComfyUI workflow, no upscaler, no redifiner etc. ...):

​

2) Image you want to use the face of in ReActor:

​

3) Result you got:

​

4) Here's how you got the result:

​

Again: this is in no case an optimized workflow, it's a quick and dirty test to reproduce something you should've posted. But I think you get the idea: we do need to see a "before" and "after" picture if you want to get help on how to improve the outcome.

 

[felldude]

You must be registered to see the links

I've released the checkpoint I have posted teaser images of 2k ultra realistic etc.

Over 20GB of training data, BLIP-2 training enforcement over 100,000 steps.

Try it out

 

[deadshots2842]

Here. output image was already recreated before i just png infoed that from there.

To be honest -- I'm not sure what you've posted there. I asked you to post a "before" and "after" image, but it seems like you only posted a picture of your "text2img" generated image and the model you want to use the face of -- but not the final result. I can't see any face swap in the images you've posted.

Here's what you should have posted instead if you want any help on how to improve your outcome:

1) Image created by txt2img (this is just a quick and dirty ComfyUI workflow, no upscaler, no redifiner etc. ...):

View attachment 3702568​

2) Image you want to use the face of in ReActor:

View attachment 3702569​

3) Result you got:

View attachment 3702570​

4) Here's how you got the result:

View attachment 3702583​

Again: this is in no case an optimized workflow, it's a quick and dirty test to reproduce something you should've posted. But I think you get the idea: we do need to see a "before" and "after" picture if you want to get help on how to improve the outcome.

To be honest -- I'm not sure what you've posted there. I asked you to post a "before" and "after" image, but it seems like you only posted a picture of your "text2img" generated image and the model you want to use the face of -- but not the final result. I can't see any face swap in the images you've posted.

Here's what you should have posted instead if you want any help on how to improve your outcome:

1) Image created by txt2img (this is just a quick and dirty ComfyUI workflow, no upscaler, no redifiner etc. ...):

View attachment 3702568​

2) Image you want to use the face of in ReActor:

View attachment 3702569​

3) Result you got:

View attachment 3702570​

4) Here's how you got the result:

View attachment 3702583​

Again: this is in no case an optimized workflow, it's a quick and dirty test to reproduce something you should've posted. But I think you get the idea: we do need to see a "before" and "after" picture if you want to get help on how to improve the outcome.

You mean u want the orginal and

To be honest -- I'm not sure what you've posted there. I asked you to post a "before" and "after" image, but it seems like you only posted a picture of your "text2img" generated image and the model you want to use the face of -- but not the final result. I can't see any face swap in the images you've posted.

Here's what you should have posted instead if you want any help on how to improve your outcome:

1) Image created by txt2img (this is just a quick and dirty ComfyUI workflow, no upscaler, no redifiner etc. ...):

View attachment 3702568​

2) Image you want to use the face of in ReActor:

View attachment 3702569​

3) Result you got:

View attachment 3702570​

4) Here's how you got the result:

View attachment 3702583​

Again: this is in no case an optimized workflow, it's a quick and dirty test to reproduce something you should've posted. But I think you get the idea: we do need to see a "before" and "after" picture if you want to get help on how to improve the outcome.

here before and after using reactor.

 

[Synalon]

You mean u want the orginal and

here before and after using reactor.

Reactor replaces faces, so get a nice picture of the face only. 512x512 is acceptable, higher res is better. Try again with just the face.
If its drawing arealistic face when you don't want it to try turning off restore faces.