Others Completed Artificial Academy 2 [MiniPPX v8] [Illusion]

[reyonathrow]

Is there a way to fix alignment issues or a setting that causes it?

This is an unfortunate side effect of the futanari overrides. The overrides exist as their own solid meshes with hard-coded coordinates; this is the entire reason why there are separate iterations of them for each of the three body sizes. Alignment was always an issue with the overrides. Adding JMCP into the mix just exacerbates the problem.

To my knowledge, the overrides technically exist as .sviex files and occupy the following paks/directories:

• jg2e01_00_00
• jg2e03_00_00
• jg2e04_00_00
• jg2p01_00_00
• jg2p04_00_00

I'm not currently aware of any methods to edit them, but they are technically fan-made, so there has to be a tool or something somewhere. You might have better luck with the Discord server (or 4chan, if you're willing).

Alternatively, you could consider using the Fleshy Dildo replacer instead of the override. See this post from a couple of years ago.

 

[Monosomething]

BudgetPro Need a bit of an explanation here: how does your "everybody wants" module work, exactly? If high love count is the factor, then it simply doesnt work. Ive asked a few chicks with anything between 25-30 love count to have sex, and they all told me to bugger off - the chance number said 0%.

 

[BudgetPro]

the chance number said 0%.

Everyone Wants is meant to unlock normally locked out interactions (force interactions on cards with no Exploitable trait, and general actions on cards with Singleminded trait)

so it doesnt effect normal cards for normal H interactions.

separately there is also a fair bit of config including restriction by virtue level so highest virtues may not go above 0 if still on the default config

the way the values work is essentially that the global setting for each interaction type is a % of your total possible love point ratio. if you have maxed love (30 count / 900 points) and the value is 20%, then you have a roll of 90*0.2 or about 18% chance.

so its not really a cheat its more like creating a very small opening you can slip through with either enough hard work earning love or a very lucky roll

thats on default settings though. you can jack that value up if you want more opportunity. if you set it to i think 3000+ youll basically have 100% rolls as long as you have 1 positive love interaction

 

[Monosomething]

so it doesnt effect normal cards for normal H interactions.

Might as well trash it, then.

 

[Clock Resonator]

Is there any guide on how to remove/change poses? There's a weird pose in the JapaneseMCP mod which I want to remove.

Also how do I modify the jg2p files in AA2Mini? I assume I have to unpack something to get them and repack but what and how? Nvm ik how to now, still not sure about the h-pose mod though.

 

[tiikerihai]

From what I remember JMCP had the lst files governing H poses in shadow sets that you need to select based on whether you have 3d rooms or not (I don't use the mod myself and I don't wanna DL to check if I remember correctly). Those are already unpacked. Either way there is never any need to repack files for AA2MiniPPX for mods, shadow sets always take precedence over packed data.
If the files you need to modify weren't in the shadow sets, they would be in the JMCP ppx.

 

[BudgetPro]

Is there any guide on how to remove/change poses? There's a weird pose in the JapaneseMCP mod which I want to remove.

Also how do I modify the jg2p files in AA2Mini? I assume I have to unpack something to get them and repack but what and how? Nvm ik how to now, still not sure about the h-pose mod though.

you might be able to just remove the button with a correct edit of the .lst in the jmcp shadowset you are using, though im not sure if that also removes it from the ai selections

changing the animation to something completely custom (you make using blender or another 3d program), requires extracting the jmcp ppx (with the unpacker in the extras folder) and then opening the correct archive in SB3U (program you can find in the modding info starting from the modern install guide) will let you export the animations/rigs to .fbx, and as well to repackage a .xa file with your modified .fbx from blender

depending how you package it back up you then need to add a new button to the proper lst's and make a custom ppx for your added mod, or you could do it as a replacement for an animation in the jmcp set, and repackage the whole jmcp back into a ppx as a forked version

 

[tiikerihai]

Don't ever bother packing personal mods (not to be shared widely) into ppx, it's a complete waste of time unless you're really desperate for disk space and the data set is big enough for compression to even make a difference. Modifying shadow sets is way easier.

 

[Clock Resonator]

Ye it seems just removing the edit from the .lst file works. Now I just need to figure out which one's the right edit.
Damn whoever added the male sitting in lap position to the mod, may he step on a rusty nail.
Nvm the only time it works is if I completely delete all the poses in anal category so everything's gone including the troll pose, this is cursed. Also deleting edits from anal cum category makes the game go into infinite loop when loading a save.

Ok I finally found the right edits, for some fking reason there's 3 different edits on anal cum poses and only one works. It's so annoying.

 

[Clock Resonator]

Does anyone still have a copy of jg2p_00_00.pp?
Thought I can just download the AI mod from mediafire and modify it to my taste but it doesn't have all the .lst files in there.

 

[tiikerihai]

Does anyone still have a copy of jg2p_00_00.pp?
Thought I can just download the AI mod from mediafire and modify it to my taste but it doesn't have all the .lst files in there.

~/Games/illusion/AA2MiniPPX/ppexcli/ppexcli.exe -e -regex "^jg2p00_00_00\.pp.*.\.lst$" ~/Games/illusion/AA2MiniPPX/data/00_Data.ppx ~/Games/illusion/AA2MiniPPX/temp

I hope you can figure out how to run the command line application ppexcli yourself. Pretty sure normally on mini it's in the extra folder.

 

[BudgetPro]

then.

maybe youll like this one then https://f95zone.to/threads/artificial-academy-2-minippx-v8-illusion.1336/post-16942827

 

[Monosomething]

maybe youll like this one then

Im not very good with modules, but im guessing this will force anyone to follow me to private rooms for sex? If so - make it so it requires 21 love count to be used, and ill buy it.

 

[mrSalty3651]

There are scenes available on the Bepis Card website. How do I use them? can you use them in game or can you only use them in a character editor? I know it is used with the poser script, but havent found how to use it.

Pretty confused

 

[Clock Resonator]

~/Games/illusion/AA2MiniPPX/ppexcli/ppexcli.exe -e -regex "^jg2p00_00_00\.pp.*.\.lst$" ~/Games/illusion/AA2MiniPPX/data/00_Data.ppx ~/Games/illusion/AA2MiniPPX/temp

I hope you can figure out how to run the command line application ppexcli yourself. Pretty sure normally on mini it's in the extra folder.

Nope I have no idea how to use it. I assume it's a linux command that I'm supposed to somehow run from powershell and replace file paths with the ones on my PC, too bad idk how to use powershell to run stuff.

I'll just try to make the missing .lst files myself, give them the appropriate names, dump them in a shadowset and manually copy paste the content from google sheets into the .lst files. If this doesn't work the only option is finding the installation for the original version before aa2mini, install and steal the file from there, hopefully I don't have to do that.

 

[tiikerihai]

Yes my command is from Linux but that's a windows command line program. It is used from either cmd.exe or powershell. In Linux it has to be run using wine, but it's basically the same there besides the paths and the paths are obvious.
AA2 data files are very obviously in /data/

In cmd.exe (winkey+r, type cmd.exe, press enter) if you cd to your ppexcli folder like cd c:\games\aa2\extra\ppexcli (with a /d switch if it's not on c:\ and the directory replaced with where ever you actually have ppexcli.exe) you can just run the command as

ppexcli.exe -e -regex "^jg2p00_00_00\.pp.*.\.lst$" c:\games\aa2\data\00_Data.ppx outputdirectory

In this example the files should be in c:\games\aa2\extra\ppexcli\outpudirectory since that's where the cd is.

It takes less than a second to extract these with ppexcli. It's just a matter of having the correct directories.
I think you can use full paths too like I did, which would be in this example typing the following in cmd.exe

c:\games\aa2\extra\ppexcli\ppexcli.exe -e -regex "^jg2p00_00_00\.pp.*.\.lst$" c:\games\aa2\data\00_Data.ppx c:\games\aa2\extra\ppexcli\outputdirectory

but I ain't using Windows so I can't test and I forget things, so don't be mad if I forgot how it works.

 

[Clock Resonator]

Yes my command is from Linux but that's a windows command line program. It is used from either cmd.exe or powershell. In Linux it has to be run using wine, but it's basically the same there besides the paths and the paths are obvious.
AA2 data files are very obviously in /data/

In cmd.exe (winkey+r, type cmd.exe, press enter) if you cd to your ppexcli folder like cd c:\games\aa2\extra\ppexcli (with a /d switch if it's not on c:\ and the directory replaced with where ever you actually have ppexcli.exe) you can just run the command as

ppexcli.exe -e -regex "^jg2p00_00_00\.pp.*.\.lst$" c:\games\aa2\data\00_Data.ppx outputdirectory

In this example the files should be in c:\games\aa2\extra\ppexcli\outpudirectory since that's where the cd is.

It takes less than a second to extract these with ppexcli. It's just a matter of having the correct directories.
I think you can use full paths too like I did, which would be in this example typing the following in cmd.exe

c:\games\aa2\extra\ppexcli\ppexcli.exe -e -regex "^jg2p00_00_00\.pp.*.\.lst$" c:\games\aa2\data\00_Data.ppx c:\games\aa2\extra\ppexcli\outputdirectory

but I ain't using Windows so I can't test and I forget things, so don't be mad if I forgot how it works.

I'm getting an error when trying this.
Didn't add output directory since if I understand it right it should just unpack into the folder where the ppexcli.exe is if not specified.

 

[tiikerihai]

I am 99% sure it's REQUIRED to specify the output directory. Anyway, you have to specify the output folder before I will think further about the nature of that error, because for the time being I am pretty sure I've gotten that exact line in an error when the command structure is invalid and I typed the command wrong.

Actually, I had the command in my terminal history and I literally do get the exact same result if I omit the output directory. Exact same result as in the very same error.

 

[Clock Resonator]

I am 99% sure it's REQUIRED to specify the output directory. Anyway, you have to specify the output folder before I will think further about the nature of that error, because for the time being I am pretty sure I've gotten that exact line in an error when the command structure is invalid and I typed the command wrong.

Actually, I had the command in my terminal history and I literally do get the exact same result if I omit the output directory. Exact same result as in the very same error.

Either I'm stupid or this thing ain't working.

Nvm it worked, I did a typo. Thanks a lot for the help and the patience.
Damn technology.

 

[Clock Resonator]

Also in case anyone else wants to use the jmcp mod for poses but doesn't want the male sitting in lap pose and the vaginal lesbian poses in straight h I'll leave the edited h-style without them here.
The file I edited is from !vanillaBukkake+vanilla_ahegao_jmcp_patch_v25.1 shadowset that comes with the mod, not sure if it breaks something if used with a different shadowset from the same mod so I also mentioned that.