Unity Completed Honey Select 2 [DX R16] [Illusion]

[turbojoe]

i dont own the game on steam. does the download contains the full game plus mods ? i got the message "Failed to load mono" I dont know what does it mean..

I´m not quite sure what you mean.
Failed to load Mono means that the Unity scripting framework isn't being loaded. So it seems your game installation is not correct.

If you downloaded the BetterRepack (now R11,

You must be registered to see the links

) there are all popular mods included.
Extract the .7z (one big via torrent, 16 splitted packs via Mega) into a gamefolder nearest top of a drive (e.g. D:/HONEYSELECT2) and run the game via InitSetting.exe.

Steam version (if I understood right you have NOT Steam) needs a special Modpack called SB3, not compatible with BetterRepack.

 

[Zork234]

i try this thx.

 

[turbojoe]

yea yea the load times are 100% impacted by the storage, was thinking more about that <10% fps improvement you mentioned when I said part of it was the DDR2 memory

Sry, not quite right. As I said here https://f95zone.to/threads/honey-select-2-dx-r10-illusion.53457/post-9342204 both improvements happend ONLY by moving to SSD (still with old DDR2)!

The Hardware upgrade on the Desktop I didn´t test yet with HS2.

 

[HardcoreCuddler]

Sry, not quite right. As I said here https://f95zone.to/threads/honey-select-2-dx-r10-illusion.53457/post-9342204 both improvements happend ONLY by moving to SSD (still with old DDR2)!

The Hardware upgrade on the Desktop I didn´t test yet with HS2.

oh damn okay
interesting
may be worth getting one myself then
thanks for the advice brother / brothette

 

[hopsbobs]

What is the difference between steam and allinone version?

 

[turbojoe]

What is the difference between steam and allinone version?

Nothing if you upgrade your Steam base game with the SB3 patch from ScrewThisNoise.

But as I know the Steam base you have to pay, the BetterRepack is free to download here

You must be registered to see the links

 

[turbojoe]

oh damn okay
interesting
may be worth getting one myself then
thanks for the advice brother / brothette

You don´t need a highend SSD, I have a Sandisk Plus 1 TB, now ~ 80 Euro

 

[HardcoreCuddler]

You don´t need a highend SSD, I have a Sandisk Plus 1 TB, now ~ 80 Euro

oh yea I know, even the shittiest SSD's and M.2's generaly beat HDD's by a good amount afaik

 

[McBaws]

Hey guys! So I've downloaded the game, enabled the graphics mode and SSS but still get these weird looking light colored faces on a couple of models (

You must be registered to see the links

). I'm not sure what else I can do, any help is appreciated.

 

[turbojoe]

Hey guys! So I've downloaded the game, enabled the graphics mode and SSS but still get these weird looking light colored faces on a couple of models (

You must be registered to see the links

). I'm not sure what else I can do, any help is appreciated.

Try to activate the correct face skin again in Charamaker.

 

[McBaws]

Try to activate the correct face skin again in Charamaker.

The characters that have this issue have unique face skin that for some reason won't allow for the selection of other options

You must be registered to see the links

. Please be patient, I'm new to this.

 

[Mr-Fox]

The characters that have this issue have unique face skin that for some reason won't allow for the selection of other options

You must be registered to see the links

. Please be patient, I'm new to this.

Don't worry tj is a very patient guy so am I. We are all beginners in the start. The fact that you post a pic with the issue and that also show the card, you have a big leg up on most people who ask questions in this thread already. What i think turbojoe meant was, either to select the skin again in "facial type" or, you can test switching to a different contour and switch back again. Then go to material editor face and select hanmen face shader.

 

[turbojoe]

The characters that have this issue have unique face skin that for some reason won't allow for the selection of other options

You must be registered to see the links

. Please be patient, I'm new to this.

Yes I know.
What I´ve ment activate another face type, then go back to the right one (= reload the correct face type and skin).
Maybe you have to save the card and reload again to see the changes.

If nothing changes it´s possible that the face skin was created with mods that aren´t included in BetterRepack.

Share the card here that I can try to find out

Edit: didn´t see that Mr-Fox solved your issue yet on the next page

 

[McBaws]

Don't worry tj is a very patient guy so am I. We are all beginners in the start. The fact that you post a pic with the issue and that also show the card, you have a big leg up on most people who ask questions in this thread already. What i think turbojoe meant was, either to select the skin again in "facial type" or, you can test switching to a different contour and switch back again. Then go to material editor face and select hanmen face shader.
View attachment 2156841

Yes I know.
What I´ve ment activate another face type, then go back to the right one (= reload the correct face type and skin).
Maybe you have to save the card and reload again to see the changes.

If nothing changes it´s possible that the face skin was created with mods theat aren´t included in BetterRepack.

Share the card here that I can try to find out

Edit: didn´t see that Mr-Fox solved your issue yet on the next page

Appreciate the kindness and solution, doing what you said fixed it.

 

[AwfulArchdemon]

So I decided to use the mod updater. I started it at around 4am and it's after 7pm. Says 2 1⁄2 hours left.

 

[KawakazeEkaze]

You don´t need a highend SSD, I have a Sandisk Plus 1 TB, now ~ 80 Euro

Yep , High-end SSD is not required
i have Samsung PRO 980 2TB here (Running in PCIe 4.0x4) , the loading time is just the same as Standard Samsung EVO or Other TLC SSD

 

[ScrewThisNoise]

So I decided to use the mod updater. I started it at around 4am and it's after 7pm. Says 2 1⁄2 hours left.

View attachment 2157017

yeeeee... servers are not having a good time. You can cancel and continue later though if you need to. If you only have a few hours to go, may not be worth it, but if there's a lot to download it may in some cases be faster to just download the torrent of the latest pack.

That doesn't always work as I don't update the modpack step in step with the repack, but in January I will probably split off the sideloader modpack from the games, and treat that as its own "repack", so releasing only the modpack more often, and hopefully I manage to get a system going for deltas between different releases of the modpack, so that it's easier to download only what you need with torrent or similar.

 

[Mr-Fox]

So I decided to use the mod updater. I started it at around 4am and it's after 7pm. Says 2 1⁄2 hours left.

View attachment 2157017

Alrighty.. I aim to please..


badun tsss

 

[HardcoreCuddler]

Hey
Before anything I'm using BR9
Sorry for possibly asking something that's been answered 1 million times, but how the heck can I make colliders interact with eachother?
As in, I'm looking at HSPE2's interface and I found the colliders for the hands and boobs, and in my mind they could interact...

Spoiler: screenshots

You don't have permission to view the spoiler content. Log in or register now.

but I don't know how to make that happen.
I can press ALT+M to let my mouse interact with hair, breasts and butts, but it does nothing for the actual characters.
What am I supposed to do?
I'm willing to manually animate this as well using FK...but I'd rather not lol
EDIT: also, I'm also looking for a way to find out exactly what mods a scene card requires so if you know a solution off the top of your head, please shoot it XD I don't want to remove my mods and look thru the warnings one by one, but I know it's an option..

 

[McBaws]

Yes I know.
What I´ve ment activate another face type, then go back to the right one (= reload the correct face type and skin).
Maybe you have to save the card and reload again to see the changes.

If nothing changes it´s possible that the face skin was created with mods theat aren´t included in BetterRepack.

Share the card here that I can try to find out

Edit: didn´t see that Mr-Fox solved your issue yet on the next page

Bad news, that only fixes it inside the character creator/editor, the same effect persists through the selection and "gameplay". Yeah there's a chance the mods needed for those models aren't included in the repack, and I have absolutely no idea where to find them.
Screenshots:

You must be registered to see the links

Models attached.