Collection Video Jackerman Collection [2024-07-24] [Jackerman]

[Kietsutwinblades]

I did see some that kinda desync the audio though, some old stuff was just never meant to be 60 fps xD

Check out flowframes for increasing fps. It uses the rife model and interpolated videos will look much more natural using flowframes than with some other programs. From my experience it works best with 3d or real world videos and the results are kind of spooky.

 

[mrsohail236]

When will the Mother Warmth chapter 3 release??

 

[NihonSucks123]

When will the Mother Warmth chapter 3 release??

Next year

 

[magix69]

I upscale using Topaz all the time and it always looks better than the original. Some guy on here upscaled the stufiofow videos to 4k and it looks way better and more clear than the original 720p videos. I've also upscaled many Umemaro works and they all look better than original. (Better = more details and less blur on higher resolutions.) The thing is though you need to use a proper AI Upscaling program to get good results. If you're just upscaling the resolution in something like adobe premiere then it's going to look terrible because that's not an Ai upscaling program.

You are correct! obviously StramSteam doesnt know what hes talking about, i Use Artemis Low quality on 720p and upscale to 2K, Amazing diference especially new output removes all noise and artifacts from original videos, Proteus Fine tune is kool too

 

[StreamSteam]

I upscale using Topaz all the time and it always looks better than the original. Some guy on here upscaled the stufiofow videos to 4k and it looks way better and more clear than the original 720p videos. I've also upscaled many Umemaro works and they all look better than original. (Better = more details and less blur on higher resolutions.) The thing is though you need to use a proper AI Upscaling program to get good results. If you're just upscaling the resolution in something like adobe premiere then it's going to look terrible because that's not an Ai upscaling program.

I used Topaz aswell made a comparison with the source material frame by frame with the same player same settings on a big tv and on a small monitor there was no difference sometimes it looked worse than the original file

 

[Icerock12]

I upscale using Topaz all the time and it always looks better than the original. Some guy on here upscaled the stufiofow videos to 4k and it looks way better and more clear than the original 720p videos. I've also upscaled many Umemaro works and they all look better than original. (Better = more details and less blur on higher resolutions.) The thing is though you need to use a proper AI Upscaling program to get good results. If you're just upscaling the resolution in something like adobe premiere then it's going to look terrible because that's not an Ai upscaling program.

I use Topaz Video AI also for all my 4K upscales and i use custom settings for it and framerates, to make it as good as i can! I mostly do it for myself becasue i feel it makes the videos look alot better. Its not always the case tho. Its very depndant on the native video source. I share the videos here for ppl to download, but nobody forces u guys to download my upscales and i always let u know its a upscale and not a native 4K, to not trick ppl. Its up to you guys if you think its better or not, then the native 1080p.

 

[Kietsutwinblades]

I used Topaz aswell made a comparison with the source material frame by frame with the same player same settings on a big tv and on a small monitor there was no difference sometimes it looked worse than the original file

Then you messed something up or your hardware cannot support it.

I use Topaz Video AI also for all my 4K upscales and i use custom settings for it and framerates, to make it as good as i can! I mostly do it for myself becasue i feel it makes the videos look alot better. Its not always the case tho. Its very depndant on the native video source. I share the videos here for ppl to download, but nobody forces u guys to download my upscales and i always let u know its a upscale and not a native 4K, to not trick ppl. Its up to you guys if you think its better or not, then the native 1080p.

Oh so you're the guy upscaling? Thanks! I think I have one or two of the Jackerman 4k upscales you've posted here and they look really good. What hardware are you using to upscale btw?

 

[Icerock12]

Then you messed something up or your hardware cannot support it.




Oh so you're the guy upscaling? Thanks! I think I have one or two of the Jackerman 4k upscales you've posted here and they look really good. What hardware are you using to upscale btw?

Np mate! happy to help! you mean my PC specs or?

 

[gumpy101]

When will the Mother Warmth chapter 3 release??

Every time it's asked, another month is added on to the release date.

 

[Kietsutwinblades]

Np mate! happy to help! you mean my PC specs or?

Yes. Upscaling to 4k requires a good pc so I'm curious.

 

[W-boi]

Yes. Upscaling to 4k requires a good pc so I'm curious.

the guy who does the 60 fps 4k videos for jackerman has a similar pc to him i think. tbh i dont see the issue. if it allows jackerman to render in a quarter of the time and nobody could tell the 4k version wasnt native, thats a big win.

 

[GLOO GLOO]

I upscale using Topaz all the time and it always looks better than the original. Some guy on here upscaled the stufiofow videos to 4k and it looks way better and more clear than the original 720p videos. I've also upscaled many Umemaro works and they all look better than original. (Better = more details and less blur on higher resolutions.) The thing is though you need to use a proper AI Upscaling program to get good results. If you're just upscaling the resolution in something like adobe premiere then it's going to look terrible because that's not an Ai upscaling program.

What settings do you use in topaz to improve video quality up to 4k?

 

[GhostllHunter]

Can anyone post the list of December monthly options when it releases?

 

[SnippsTheSlammer]

Anyone can get quality upscales if they have the right software and hardware to handle the job. I have a 1080ti and 4670k and 4k upscales take more than a day on average so I don't like to do it. But if you have a beefier PC then you can upscale using Topaz and get really good results.

Where can I get a copy of Topaz?

 

[claralover]

Every time it's asked, another month is added on to the release date.

I believe we're up to an extra 21 months so far, lets get it to 30 before the monthly gets released

 

[Icerock12]

Yes. Upscaling to 4k requires a good pc so I'm curious.

Oh my specs are:
CPU: AMD Ryzen 9 5900X
GPU: RTX 3080TI 12GB
Memory: 32GB

Hope this helps!
and just to put some perspectiv on how long it takes me too upscale a movie to 4K.
A 5min movie takes about 3-4 hours to upscale if no framerate is changed (If i change the framerate it can take 4-5 hours to upscale it). Most movies that come out today have 1080p 30 framrate and i nomally change that to 60 frames when i upscale to get the video to flow better. I never go over 60 frames if the native video dont have it or more.
Because if the native video is 30 frames and i upscale it to lets say 120 frames the image starts looking odd and loses quality imo and it takes alot more hours to render the video.

What more can change the hours is whats in the movie too exemple below:
[AgentRedGirl] Amy's Big Wish Episode 3 - Part 5 - Double Snuggle
Took me 5 hours to upscale to 4K, native video is 447Mb and 4K version is 4,34Gb, here i added some settings that Rigid3D video did not have, so u see the Amys Big Wish, jump it takes in both size and hours.
and
[Rigid3D] Futa V x Meredith Stout - Venus In Furs
Took me about 3 hour to upscale to 4K, native video is 797Mb and 4K version is 1,23Gb

And both movies are about 5mins long and i used same settings on them and as u see the hours change.
So if a 5min movie takes about 3-5 hours, a 10min video is double that and so on....

Important to note is these hours change depending on what rig u have and what program u use to upscale ofc.
This is just mine oberverstions and have to remember that any change u add to the options in the upscaling program will add to the hours redering it.

Hope this explains some things

 

[yefer004]

Oh my specs are:
CPU: AMD Ryzen 9 5900X
GPU: RTX 3080TI 12GB
Memory: 32GB

Hope this helps!
and just to put some perspectiv on how long it takes me too upscale a movie to 4K.
A 5min movie takes about 3-4 hours to upscale if no framerate is changed (If i change the framerate it can take 4-5 hours to upscale it). Most movies that come out today have 1080p 30 framrate and i nomally change that to 60 frames when i upscale to get the video to flow better. I never go over 60 frames if the native video dont have it or more.
Because if the native video is 30 frames and i upscale it to lets say 120 frames the image starts looking odd and loses quality imo and it takes alot more hours to render the video.

What more can change the hours is whats in the movie too exemple below:
[AgentRedGirl] Amy's Big Wish Episode 3 - Part 5 - Double Snuggle
Took me 5 hours to upscale to 4K, native video is 447Mb and 4K version is 4,34Gb, here i added some settings that Rigid3D video did not have, so u see the Amys Big Wish, jump it takes in both size and hours.
and
[Rigid3D] Futa V x Meredith Stout - Venus In Furs
Took me about 3 hour to upscale to 4K, native video is 797Mb and 4K version is 1,23Gb

And both movies are about 5mins long and i used same settings on them and as u see the hours change.
So if a 5min movie takes about 3-5 hours, a 10min video is double that and so on....

Important to note is these hours change depending on what rig u have and what program u use to upscale ofc.
This is just mine oberverstions and have to remember that any change u add to the options in the upscaling program will add to the hours redering it.

Hope this explains some things

I don't want to imagine how long it will take you to render at 4k 60dps WW3

 

[Icerock12]

I don't want to imagine how long it will take you to render at 4k 60dps WW3

Dont worry mate i will make it into 4K when it comes out
Just let it render overnight and when i get back from work it will be done

 

[obibobi]

If you want content like mother's warmth and southern hospitality, and hate anything else, there's a great site called pornhub, they have all the generic, boring and uncreative content you could ever want... And it's all real! Don't worry about the 3D porn community, we'll recover from your loss.

I mean dude, think about what you write out before you hit post, the ignorance on display.

There are far more 3D video's of women getting fucked by dogs and monsters than incest and just because you like a fetish, doesn't make it not generic like most of those video's where women gets fucked with no story or creativity.

 

[Stranger29]

ayo wheres the video