Unity Completed The Sassy Girl and the Invisible Ghost [v2.0.0] [BouSoft]

[skfikops]

My PC is an AMD Ryzen 3400G with an ATI Radeon 580 with 8GB and 16GB of RAM. It hasn't crashed on me, so it must be a graphics driver issue or a failing update. I will try the version you uploaded.

Screen Capture ➡ In the image ➡ Bottom right corner ➡ System Compatibility ➡ AMD (your OS) ➡ DOWNLOAD
The game files must be downloaded by yourself. My operating system is different and I cannot select the system version for you.
Game is here ➡

You must be registered to see the links

Save data is here ➡

You must be registered to see the links

 

[Alda80]

I must tell you that it won't start if the bepin folder isn't in the game directory. You should NEVER delete the bepin folder, as it can cause problems.

 

[Alda80]

The images you have here are newly taken with sharex, the game that someone uploaded with bepin ex, the bep is set incorrectly, because I had the folder in NamaikiMusumeToMienaiYuurei_Data, when it should be in the root directory of the game. After skfikops I have that file that I downloaded and overwrote the one I had before and it worked without problem, even though I had the game in version 2.0. As I said before, I have an AMD Ryzen 3400G with Radeon RX 580 8GB and 16GB of RAM, so if bepin is installed correctly, it shouldn't give any problems.

 

[skfikops]

I must tell you that it won't start if the bepin folder isn't in the game directory. You should NEVER delete the bepin folder, as it can cause problems.

View attachment 5369014 View attachment 5369016

The images you have here are newly taken with sharex, the game that someone uploaded with bepin ex, the bep is set incorrectly, because I had the folder in NamaikiMusumeToMienaiYuurei_Data, when it should be in the root directory of the game. After skfikops I have that file that I downloaded and overwrote the one I had before and it worked without problem, even though I had the game in version 2.0. As I said before, I have an AMD Ryzen 3400G with Radeon RX 580 8GB and 16GB of RAM, so if bepin is installed correctly, it shouldn't give any problems.

Are you referring to the BepInEx folder? Well, for its current version, it’s redundant—whether you install it or not doesn’t really matter. Just drop both BepInEx and dotnet into the game directory, and then you can run CMD. However, after it finishes running, it crashes immediately without the game screen showing up. I checked and found that CMD displays a "Data Error." This likely requires someone with programming knowledge to resolve. Given my abilities, I can only go this far. If the methods above cannot solve your issue, I'm sorry, but you may need to seek help from a professional. There's nothing more I can do.

 

[Alda80]

Not just wanting to contribute my opinion, I'm fine with both the game without and with the bepin. I was just trying to see if anyone had any issues, as providing information about another team would work. Sorry for the inconvenience.


P.D.: I just installed the most up-to-date version of bepin, 5.4.23.4, but now the executable starts without a problem. For people who have this problem with bepin, I'll show you the error log and logoutput results, but I see a serious problem with the Ilc2 process.

Here are both the logoutput and errorlog:

You must be registered to see the links

 

[skfikops]

Not just wanting to contribute my opinion, I'm fine with both the game without and with the bepin. I was just trying to see if anyone had any issues, as providing information about another team would work. Sorry for the inconvenience.

This is what happened when I used BepInEx myself. I'm not sure what the issue is—the files are definitely placed in the correct location.

 

[Alda80]

This is what happened when I used BepInEx myself. I'm not sure what the issue is—the files are definitely placed in the correct location.

From what I see, it could be the ILC that's causing the error. Let me remove it. Checking the plugins, you should try removing DumbRendererDemosaic_Il2Cpp_net6, DumbRendererDemosaic_Il2Cpp_pre1, and SW_Decensor_il2cpp. If it keeps giving you errors, you should wait for an improved decensoring for the game. But if I think that's it, the ILC may not be necessary, since it already has BE5 and BE6.

 

[skfikops]

From what I see, it could be the ILC that's causing the error. Let me remove it. Checking the plugins, you should try removing DumbRendererDemosaic_Il2Cpp_net6, DumbRendererDemosaic_Il2Cpp_pre1, and SW_Decensor_il2cpp. If it keeps giving you errors, you should wait for an improved decensoring for the game. But if I think that's it, the ILC may not be necessary, since it already has BE5 and BE6.

After extracting BepInEx, I copied and pasted all the files into the game directory. When I clicked to start the game, CMD executed, but then it crashed as shown in the image. The game didn't launch, and no window appeared.
Following the folder structure in your image, I placed dotnet inside the game directory. This time, CMD didn't show up, and the game screen directly popped up. Has it already been initialized without verification? I'm not sure if this is the correct behavior. Maybe you're right—I need to check inside the game first.

 

[skfikops]

From what I see, it could be the ILC that's causing the error. Let me remove it. Checking the plugins, you should try removing DumbRendererDemosaic_Il2Cpp_net6, DumbRendererDemosaic_Il2Cpp_pre1, and SW_Decensor_il2cpp. If it keeps giving you errors, you should wait for an improved decensoring for the game. But if I think that's it, the ILC may not be necessary, since it already has BE5 and BE6.

followed your instructions and deleted the three DLL files, but the CMD issue persists—it still crashes without the game screen appearing. I'm starting to suspect it might be a problem with BepInEx 6. Perhaps switching to BepInEx 5 could resolve the issue? I'm trying it now.

 

[Alda80]

After extracting BepInEx, I copied and pasted all the files into the game directory. When I clicked to start the game, CMD executed, but then it crashed as shown in the image. The game didn't launch, and no window appeared.
Following the folder structure in your image, I placed dotnet inside the game directory. This time, CMD didn't show up, and the game screen directly popped up. Has it already been initialized without verification? I'm not sure if this is the correct behavior. Maybe you're right—I need to check inside the game first.

Yes, that's the best thing, because the bepin on GitHub is always updating, so sometimes it's good to check, but if it seems to be bothering you, it's good to know. Hugs from Spain.
This is the structure of the BepinEx compressed file. This is what should always be included in the game folder to be injected. Otherwise, the first launch of a new game will create the plugins folder and other folders within the same BepinEx folder. There's no need to put the folder inside other game folders; it should always be the root folder of the game to be injected. I hope this has been helpful.

 

[Alda80]

That's a sign that it's working well. Don't worry, don't worry.

 

[skfikops]

That's a sign that it's working well. Don't worry, don't worry.

I was overthinking it... I thought BepInEx wasn't running if the CMD execution window didn't appear. I've played many games where the CMD window pops up first, closes, and then the game screen shows. Why doesn't this game do that? It's really strange.

 

[kumarin]

I was overthinking it... I thought BepInEx wasn't running if the CMD execution window didn't appear. I've played many games where the CMD window pops up first, closes, and then the game screen shows. Why doesn't this game do that? It's really strange.

issue on Unity6k.

I think I misrepresented the situation. To explain what's happening now, hundreds of Unity games are undergoing security updates, which are upgrading their Unity versions.

As a side effect, some games are not able to use the BepInEx plugin. Strictly speaking, what he said is correct. BepInEx still works. However, most games will experience a Close to Desktop (CTD) simply by installing it. There's currently one workaround:

This will allow BepInEx to run as he said. However, using even one Unity Engine will cause a CTD. The above fix, UnityLogListening, will still cause a CTD.

This issue was common in Unity6000, and it used to work fine in some Unity6000 games. However, I believe this update has made Unity6000 games unavailable.

I'll list down a few games that I've experienced that used to work but no longer do with this update. those are all Unity6000.
Hyper Deep Throat RJ01369203
Dawn of Marionette
なまいき娘と見えない幽霊 RJ01217604
逆サバイバー 淫乱女神リリア ～快楽に沈む迷宮～

You must be registered to see the links

 

[skfikops]

That's a sign that it's working well. Don't worry, don't worry.

issue on Unity6k.

Understood. Thank you all for your help

 

[f5kingcome]

Can someone please reply too me when someone finds out how to fix the crashing, I click on the start menu and it freeze and then close. (Should also mention I'm on windows 11 and using a laptop.)

 

[chido2004]

my save

 

[nicklulson]

What is the anal and urethral insertion linked to unlock? Is it just grinding days away on end??? Does this manliness taste etc thing from the tv do anything? How do I increase the anal and urethral stats efficiently??? I'm blueballed af over here -.-

On a certain day you can unlock "loosening" injections, and then you can use a "tool" to deepen the looseness.

 

[Kratas1337]

On a certain day you can unlock "loosening" injections, and then you can use a "tool" to deepen the looseness.

I just unlocked these at day 48. Judging by the names one should expand, shrink and tighten. Gonna try these. Thanks for the info.

edit: yeah the red one works like a charm. Now I only wonder how to inflate her belly??

 

[skfikops]

Can someone please reply too me when someone finds out how to fix the crashing, I click on the start menu and it freeze and then close. (Should also mention I'm on windows 11 and using a laptop.)

You can launch the game simply by not using BepInEx. Currently, the latest version of BepInEx 6 causes the game to crash immediately after the command prompt window appears, making it impossible to start.

If you still wish to use BepInEx, you can try this version here: ➡

You must be registered to see the links

The game will launch without the command prompt window appearing, but please note that you'll still be playing the censored version of the game.

Therefore, the download files I shared don't actively use BepInEx - I've placed it in a separate folder for optional use instead.

 

[mastajek]

You can launch the game simply by not using BepInEx. Currently, the latest version of BepInEx 6 causes the game to crash immediately after the command prompt window appears, making it impossible to start.

If you still wish to use BepInEx, you can try this version here: ➡

You must be registered to see the links

The game will launch without the command prompt window appearing, but please note that you'll still be playing the censored version of the game.

Therefore, the download files I shared don't actively use BepInEx - I've placed it in a separate folder for optional use instead.

what about bepinx 5.4? I tried the ill2cpp one but it still crashes for me. I wonder if older versions of it works or not.