- Aug 13, 2019
- 1,084
- 4,446
pretty good rendering. crisp. I think her hand under her stomach should be more like pressed up against the pillow in front of her for support. But overall its nice. 
- Thread starter Deleted member 487
- Start date
Thank you I'm new to Daz and just learningpretty good rendering. crisp. I think her hand under her stomach should be more like pressed up against the pillow in front of her for support. But overall its nice.
I agree with where her hand should be too!
View from above
- Aug 13, 2019
- 1,084
- 4,446
- Aug 13, 2019
- 1,084
- 4,446
It is quite fun to create these perverted scenes of Lust.
Two other options
You must be registered to see the links
You must be registered to see the links
- Aug 13, 2019
- 1,084
- 4,446
Hi Jaydog, I have a question. Where do you get your interiors? That room looks like a Mansion and is greatly detailed.
- Aug 13, 2019
- 1,084
- 4,446
Love the way the Man and Woman in the background look so Satisfied.
goditseb
Member
- Apr 28, 2017
- 499
- 1,693
a project, once would hope a game with besti content
- Aug 13, 2019
- 1,084
- 4,446
I would be happy to create a game with Besti content but there has got to be a good story first. I'm not so good at writing.
- Aug 13, 2019
- 1,084
- 4,446
- May 14, 2017
- 1,504
- 3,471
wow-since finding f95zone what can i say-lucky dogs but oh so hot
Source Film Maker is actually what I used to use a lot. I got fed up with it, because it had a lot of crashing. It also isn't as high quality, or well maintained as DAZ. I use it very little now. If you guys want to see some of my older stuff, just look up "dragonb13" on Naughty Machinima.
I was very unsatisfied with the way K9 is connected to Dog 8, despite not bad results I've presented a few pages back. So I though of another way.
With use of additional bones I've added to Dog, I was able to change the shape of the tip of original Daz 8 gens, so now K9 really look like integral part of it (don't mind the render quality, it's basic headlamp)
Additional bones also allows me to bend cock a little up or down, left or right.
I've also added bone to balls, to move them away when cock will be bent to rear. I'm not happy with the results yet, but at least I can move them away.
Now I only need to work on those extra bones to make it possible to completely bend cock backwards. Seems difficult, but it's definitely not impossible
With use of additional bones I've added to Dog, I was able to change the shape of the tip of original Daz 8 gens, so now K9 really look like integral part of it (don't mind the render quality, it's basic headlamp)
Additional bones also allows me to bend cock a little up or down, left or right.
I've also added bone to balls, to move them away when cock will be bent to rear. I'm not happy with the results yet, but at least I can move them away.
Now I only need to work on those extra bones to make it possible to completely bend cock backwards. Seems difficult, but it's definitely not impossible
Last edited:
BRAVO! I thought it was just me that realized that the anatomy of Daz 8 Dog was off!I was very unsatisfied with the way K9 is connected to Dog 8, despite not bad results I've presented a few pages back. So I though of another way.
With use of additional bones I've added to Dog, I was able to change the shape of the tip of original Daz 8 gens, so now K9 really look like integral part of it (don't mind the render quality, it's basic headlamp)
View attachment 530436
View attachment 530437
View attachment 530438
View attachment 530443
View attachment 530457
Additional bones also allows me to bend cock a little up or down, left or right.
View attachment 530466 View attachment 530467
I've also added bone to balls, to move them away when cock will be bent to rear. I'm not happy with the results yet, but at least I can move them away.
Now I only need to work on those extra bones to make it possible to completely bend cock backwards. Seems difficult, but it's definitely not impossible
goditseb
Member
- Apr 28, 2017
- 499
- 1,693
this looks really great, would be nice to share the parametersI was very unsatisfied with the way K9 is connected to Dog 8, despite not bad results I've presented a few pages back. So I though of another way.
With use of additional bones I've added to Dog, I was able to change the shape of the tip of original Daz 8 gens, so now K9 really look like integral part of it (don't mind the render quality, it's basic headlamp)
View attachment 530436
View attachment 530437
View attachment 530438
View attachment 530443
View attachment 530457
Additional bones also allows me to bend cock a little up or down, left or right.
View attachment 530466 View attachment 530467
I've also added bone to balls, to move them away when cock will be bent to rear. I'm not happy with the results yet, but at least I can move them away.
Now I only need to work on those extra bones to make it possible to completely bend cock backwards. Seems difficult, but it's definitely not impossible
It's not just parameters, I've added bones to geometry to make it possible. So I would need to share whole figure, but I need to work on it more, to make a few extra functionalities (including 180 degree bend to rear), and maybe add some morphs.this looks really great, would be nice to share the parameters
This current model - I messed something up with polygons, and now it eats huuuuge amount of memory. I will start from scratch soon.
Maybe after all I will delete all parts except gens area, so it could be just conformed to standard Dog 8. We will see.
So, should I keep my work posted here?
OK, I got some new stuff.
I did not had enough time today (and probably will not have for next few days/weeks), so I made "easy" option. I've just added a bone simulating the rest of the cock (meaning - the part inside the fur), and to make it bend backward, we can just bend this bone and rest will follow.
That looks quite good when angle is from range 0-10, then it starts to look odd. Then again it looks better when angle is about 140 degrees, which is when cock is basically facing rear. As I said, it's easy option, so the results are not terrific, but at least You can see fur coating just behind the knot, which is something
This time I've added two bones to balls, that gives more options to move them.
This is how it looks when cock is in front:
(balls are a little corrected in angle and a bit bigger than original)
And now when cock is bend backwards
(balls bit squeezed and lifted)
As I said, it's not anything great
Angle can be adjusted, as well as position of the whole gens
And with Oso Fur it can look quite nicely
Two more images are smooth shaded screens, so You can have better view on the shape of gens/K9 joint
(notice how balls are twisted a little in one of the images)
I did not had enough time today (and probably will not have for next few days/weeks), so I made "easy" option. I've just added a bone simulating the rest of the cock (meaning - the part inside the fur), and to make it bend backward, we can just bend this bone and rest will follow.
That looks quite good when angle is from range 0-10, then it starts to look odd. Then again it looks better when angle is about 140 degrees, which is when cock is basically facing rear. As I said, it's easy option, so the results are not terrific, but at least You can see fur coating just behind the knot, which is something
This time I've added two bones to balls, that gives more options to move them.
This is how it looks when cock is in front:
(balls are a little corrected in angle and a bit bigger than original)
And now when cock is bend backwards
(balls bit squeezed and lifted)
As I said, it's not anything great
Angle can be adjusted, as well as position of the whole gens
And with Oso Fur it can look quite nicely
Two more images are smooth shaded screens, so You can have better view on the shape of gens/K9 joint
(notice how balls are twisted a little in one of the images)
- Aug 13, 2019
- 1,084
- 4,446
goditseb
Member
- Apr 28, 2017
- 499
- 1,693
you dont need to share the file, but maybe a small "how to do" tutorial with pics would be good enough ( when you are done and happy with the result )It's not just parameters, I've added bones to geometry to make it possible. So I would need to share whole figure, but I need to work on it more, to make a few extra functionalities (including 180 degree bend to rear), and maybe add some morphs.
This current model - I messed something up with polygons, and now it eats huuuuge amount of memory. I will start from scratch soon.
Maybe after all I will delete all parts except gens area, so it could be just conformed to standard Dog 8. We will see.
So, should I keep my work posted here?
That would be really great, but only if you want to
I'm using tutorials myself, I'm really a complete noob hereyou dont need to share the file, but maybe a small "how to do" tutorial with pics would be good enough ( when you are done and happy with the result )
That would be really great, but only if you want to
But that is not a bad idea, I could just describe it step by step, so anyone could try to make a better version.
I don't mind sharing either model or morphs/parameters values, but not when it's just half-ass finished. But I will share it