- Mar 16, 2018
- 4,453
- 31,683
better info ...better fanart!
- Jun 17, 2017
- 5,852
- 29,772
Daddy gets his Skinny Lover wish...
- Jun 12, 2020
- 1,485
- 22,967
- Jun 17, 2017
- 5,852
- 29,772
Not calling anyone out here, and I'm guilty of not fixing it in post a few times myself, but I want to talk about the 'kink' in D's ponytail.
D is quite short, which messes with the ponytail shape, causing an overlap around the neck, and near the bottom.
There are a few suggestions around here r.e. how to minimize this, I've tried most (maybe all?) of them, and it never quite goes away...
HOWEVER, there is a REALLY EASY WAY to get around this.
After you've loaded your 'D' figure into the scene:
1) Load a second instance/model of Rochelle Ponytail Hair into the scene. Do NOT select any figures before you do this, just load it 'by itself'.
2) Copy the hair textures over from the hair that's on 'D' over to the second ponytail, so that they match.
3) Select 'D's head, so that the 'figure tree' opens up in your Scene tab.
4) Drag the second instance of Rochelle Ponytail Hair onto the Head node of 'D'.
5) Under the Surfaces tab for the hair you just dragged onto 'D's head, Dial the Cutout Opacity of everything except for Back, BackUnder, and HairBand to 0, thus 'hiding' everything except for the ponytail and the hair band.
6) Now, select the 'first instance' of Rochelle Ponytail Hair (that was on her head already) and dial down the CutoutOpacity of Back and BackUnder to 0.
7) The 'second' ponytail that is still visible is probably floating a ways above the head of 'D'. Select it (the one now parented to the head node) Adjust the Y Translate parameter to 0, then nudge it upwards, and nudge the Z Translate a bit until the two hair bands overlap each other perfectly.
8) Since you currently have the second instance selected, adjust the length of the ponytail to taste. It'll be 'full length' for a 5'10" character, and 'D' is a bit shorter than that...
That's it! Save this new 'D' with the new and improved ponytail so that you can easily load her later.
No kink, no need for post work to hide the kink!
Note that you'll need to make sure to select the second ponytail's Tail node to adjust the tail swing, etc. Selecting the 'first' Rochelle tail will just swing the 'invisible' ponytail, which won't help...
You're welcome!
D is quite short, which messes with the ponytail shape, causing an overlap around the neck, and near the bottom.
There are a few suggestions around here r.e. how to minimize this, I've tried most (maybe all?) of them, and it never quite goes away...
HOWEVER, there is a REALLY EASY WAY to get around this.
After you've loaded your 'D' figure into the scene:
1) Load a second instance/model of Rochelle Ponytail Hair into the scene. Do NOT select any figures before you do this, just load it 'by itself'.
2) Copy the hair textures over from the hair that's on 'D' over to the second ponytail, so that they match.
3) Select 'D's head, so that the 'figure tree' opens up in your Scene tab.
4) Drag the second instance of Rochelle Ponytail Hair onto the Head node of 'D'.
5) Under the Surfaces tab for the hair you just dragged onto 'D's head, Dial the Cutout Opacity of everything except for Back, BackUnder, and HairBand to 0, thus 'hiding' everything except for the ponytail and the hair band.
6) Now, select the 'first instance' of Rochelle Ponytail Hair (that was on her head already) and dial down the CutoutOpacity of Back and BackUnder to 0.
7) The 'second' ponytail that is still visible is probably floating a ways above the head of 'D'. Select it (the one now parented to the head node) Adjust the Y Translate parameter to 0, then nudge it upwards, and nudge the Z Translate a bit until the two hair bands overlap each other perfectly.
8) Since you currently have the second instance selected, adjust the length of the ponytail to taste. It'll be 'full length' for a 5'10" character, and 'D' is a bit shorter than that...
That's it! Save this new 'D' with the new and improved ponytail so that you can easily load her later.
No kink, no need for post work to hide the kink!
Note that you'll need to make sure to select the second ponytail's Tail node to adjust the tail swing, etc. Selecting the 'first' Rochelle tail will just swing the 'invisible' ponytail, which won't help...
You're welcome!
Last edited:
- Mar 16, 2018
- 4,453
- 31,683
- Jun 11, 2017
- 784
- 5,105
Dee I love you, but I have a new favorite.
- Jun 11, 2017
- 784
- 5,105
We've had people in here suggest that. Talk all you want dude. Its a forum after all.
- Mar 16, 2018
- 4,453
- 31,683
- Aug 21, 2017
- 1,169
- 763
A test of my new gpu (rtx 3070) with a genesis8 dee model
changed the hair
Adding alittle tease of two from my current project
Last edited:
- Jun 11, 2017
- 784
- 5,105
Welcome to the RTX 3000 series, where people are selling kidneys just to get oneView attachment 1075427
A test of my new gpu (rtx 3070) with a genesis8 dee model
View attachment 1075634
Adding alittle tease of two from my current project
- Dec 30, 2017
- 6,927
- 33,064
I'm waiting for the best PC to come out that won't ever need to be updated before I upgrade.
All pics I uploaded here was made with an old PC, put together with used parts years ago. Q9650 CPU, Asus P5Q3-Deluxe Motherboard, 16GB DDR3 Kingston 1333MHz Memory, Kingston A400 960GB SSD and Asus Strix 1070. That is my 320 Euro PC. I thing for an old PC is the result good!
But I must buy a new one. It is unfortunately too slow for render.
I thing for an old PC is the result good! But I must buy a new one. It is unfortunately too slow for render.
Welcome to the RTX 3000 series, where people are selling kidneys just to get one
My old gpu went bust and i had a guarentee on it
So the shop gave me a 3070 instead. However had to pay like Im a happy panda.
Sorry to hear that manAll pics I uploaded here was made with an old PC, put together with used parts years ago. Q9650 CPU, Asus P5Q3-Deluxe Motherboard, 16GB DDR3 Kingston 1333MHz Memory, Kingston A400 960GB SSD and Asus Strix 1070. That is my 320 Euro PC.
But I must buy a new one. It is unfortunately too slow for render.
Last edited:
- Dec 13, 2018
- 571
- 3,681
Dee on vacation with daddy and uncle
Quick and dirty render, because I was just bored.
Quick and dirty render, because I was just bored.
- Mar 16, 2018
- 4,453
- 31,683
wish the pillow was a "morphing"
Last edited:
- Dec 13, 2018
- 571
- 3,681
Dee on vacation with daddy and uncle
One more lazy render.
One more lazy render.
- Dec 30, 2017
- 6,927
- 33,064
For the 300th page OhWee suggested doing something special.
It took a long time to render but...
It took a long time to render but...
- May 11, 2017
- 75
- 86
Awesome hope you continue this. I see the no evil monkeys in the background.
- Dec 13, 2018
- 571
- 3,681
Dee on vacation with daddy and uncle
More of Dee's vacation soon. For my patrons on Patreon.
More of Dee's vacation soon. For my patrons on Patreon.