Collection Video Dezmall Collection [2025-08-11] [dezmall]
- Thread starter rf96
- Start date
could you upload it in 1080p? my laptop doesn't play it in 4k.
thanks
OldmenKing
Member
- Sep 23, 2016
- 276
- 915
- 134
Try shutting down your pc and then start up, plus check if your internet working this happen to me once. I don't know why mega goes down. This help me and work. Hope I was helpful.
i know that fapping to 4k would be glorious...
but sadly my device cant play 4k
so if anyone has 720p or 1080p pls
but sadly my device cant play 4k
so if anyone has 720p or 1080p pls
- Aug 11, 2017
- 10,670
- 93,180
- 1,059
Mustang Flex
Member
- Oct 24, 2017
- 457
- 1,072
- 288
- Aug 11, 2017
- 10,670
- 93,180
- 1,059
720p
You must be registered to see the links
-
You must be registered to see the links
Mustang Flex
Member
- Oct 24, 2017
- 457
- 1,072
- 288
leproso0413
Well-Known Member
- May 26, 2017
- 1,518
- 377
- 318
For the "Virtual Reality" video, do you need a VR system, or you can watch the video even without it ?
- Aug 11, 2017
- 10,670
- 93,180
- 1,059
Howdy y'all, I come bringing gifts in the form of 60 FPS versions of Dezmall's videos.
All have been interpolated up from 24 or 30 FPS up to 60 FPS and have been encoded with HEVC to save space. The 4K videos were originally ~5.8 GB and have been brought down to ~3.3 GB; the 2K videos were originally ~21.9 GB and have been brought down to ~9.5 GB. There might be slight visual artifacts, if any at all.
You must be registered to see the links
You must be registered to see the links
You must be registered to see the links
You must be registered to see the links
All have been interpolated up from 24 or 30 FPS up to 60 FPS and have been encoded with HEVC to save space. The 4K videos were originally ~5.8 GB and have been brought down to ~3.3 GB; the 2K videos were originally ~21.9 GB and have been brought down to ~9.5 GB. There might be slight visual artifacts, if any at all.
Can you please share how you change the quality from 30 to 60FPS? I need Software/Tool name along with settings so the quality and smoothness of 60Fps can be added over 30fps
I use Flowframes by n00mkrad/nmkd. Settings all depend on your setup so you'll probably have to tinker around. Generally though I use H.265/HEVC encoding when I export the interpolated video because it's the newer and more efficient encoder to replace H.264 (what the vast majority of videos are currently encoded with for the widest compatibility). H.265 is supposedly able to get the same visual quality as H.264 with only half the bitrate, so it's really good for saving space. CRF is pretty much what controls the quality, and while "ideally" using H.265 at a CRF of 20-25 is in the realm of visually lossless to the original videos, I do 18 (lower CRF is higher quality but higher bitrate [so bigger filesizes]) just to be sure. It still ends up smaller than the original video more than 9 times out of 10. But yeah, there are plenty of settings to mess around with, but that'd be up to you. Also, the speed of the interpolation is very dependent on what models and computer hardware you use. I'm lucky with a high-end GPU so that makes things fast enough for me.