Unity Completed Honey Select 2 [DX R16] [Illusion]

[richman1975]

So I downloaded the all in one and the game works fine. However I don't see better penetration. Do I need to download the 52gb sideloader for that? Or am I just missing something?

 

[MrLaurent]

I can't update any files (by KKManager)
i see than the path to copy the files (new pack) is too long.
(D:\Games\[ScrewThisNoise] HoneySelect 2 DX BetterRepack R4\mods\Sideloader Modpack - Bleeding Edge\Discord\Sideloader Modpack - Uncensor Selector\UserData\Overlays\Uncensor\Alien_Vagina-A_Colour_Overlays\100-Percent_Opacity)
i explain.
if i create a new file in "100-Percent_Opacity" folder, the max length of filename is 31.
if i create a new file in D:\, i can have a very long filename (eg: 100), i can copy it in "100-Percent_Opacity", but i can't change the end of filename because i have an error "filename too long".

i have windows 10 and a ntfs SSD.

an idea?
1) i can rename [ScrewThisNoise] HoneySelect 2 DX BetterRepack R4, but it's not a perfect solution for me.

thx

 

[ScrewThisNoise]

thanks, that's great about the plugin.

about the 7z update, I was just thinking it would be cool to have a 7z of the modified files and a bat file to delete the files that need deleting. That should cover everything. Uncompress the 7z overtop of the game directory, then run the bat and you are good to go.

can you help with the following questions:

How do you rotate a girl by where you click or the centre of the model? This gets messed up after using left and right button to move around in the scene I think. After that point, it rotates around some point in space that moves the model out of view and I haven't found a way to get back to the rotation around the centre of the model.

is there a way to touch the models via a virtual hand or something during scenes or are you just observing the animation in the scene and control the speed?

how is saving done per girl. is it stored in the original card, in a duplicate card or another file?

if you modify a card while using it, what changes in your group/game?

thanks for all your work

That's basically what the installer is. If you're curious about what it's doing, sure, here's the source code for the R4.0.1 updater:

You must be registered to see the links

(Gonna need a rewrite as I'm in the progress of migrating away from this framework to a more flexible one, but currently this is the one I use so)

Not much scary stuff going on here, but way more user friendly than doing the same in a CMD window. There's a reason BAT and CMD files are out of fashion, people don't trust it. Blame Hollywood

think the manual explains game control operations, so do give that a peek for that, and no idea what you're asking with the rest of your question?

 

[ScrewThisNoise]

I can't update any files (by KKManager)
i see than the path to copy the files (new pack) is too long.
(D:\Games\[ScrewThisNoise] HoneySelect 2 DX BetterRepack R4\mods\Sideloader Modpack - Bleeding Edge\Discord\Sideloader Modpack - Uncensor Selector\UserData\Overlays\Uncensor\Alien_Vagina-A_Colour_Overlays\100-Percent_Opacity)
i explain.
if i create a new file in "100-Percent_Opacity" folder, the max length of filename is 31.
if i create a new file in D:\, i can have a very long filename (eg: 100), i can copy it in "100-Percent_Opacity", but i can't change the end of filename because i have an error "filename too long".

i have windows 10 and a ntfs SSD.

an idea?
1) i can rename [ScrewThisNoise] HoneySelect 2 DX BetterRepack R4, but it's not a perfect solution for me.

thx

Just ignore it, it's indeed deep in the system. Bleeding edge is pretty much my working folder, so things are kinda just stuffed in there and shuffled around as I work. I take no care in making that folder user friendly, as... well... it's my workspace, not meant for release, thus why you have to accept a warning to use it.

you can replicate my setup to get the same experience I have though if you really want it, as I always have my game on C:\Illusion\HoneySelect2, or you can grab whatever you want at

You must be registered to see the links

 

[fnnn]

Just ignore it, it's indeed deep in the system. Bleeding edge is pretty much my working folder, so things are kinda just stuffed in there and shuffled around as I work. I take no care in making that folder user friendly, as... well... it's my workspace, not meant for release, thus why you have to accept a warning to use it.

you can replicate my setup to get the same experience I have though if you really want it, as I always have my game on C:\Illusion\HoneySelect2, or you can grab whatever you want at

You must be registered to see the links

why do you delete optional mods directory in your update?

is there a way to reset the rotation point of what you are rotating around? Sometimes the rotation point moves away from the girl during creation.

is there a way to interact with the girl directly via your cursor or are you just watching the animation with limited control?

 

[ScrewThisNoise]

why do you delete optional mods directory in your update?

is there a way to reset the rotation point of what you are rotating around? Sometimes the rotation point moves away from the girl during creation.

is there a way to interact with the girl directly via your cursor or are you just watching the animation with limited control?

I delete it to replace it with the new one. A lot of users play around with the Optional mods folder, so resetting it makes it all available again after updating. Basically resetting the pack state to a known good means that existing optional mods are removed from the game, so need to restore the optional mods folder to allow the user to install it all over again.

This all is a gigantic exercise in addressing all scenarios for all users as best as can be done, so I'm taking into account normal changes users do to the pack after extracting it, like messing with the optional mods folder and adding or removing mods, sometimes to not great results

As a result from this approach, using the updater may also be used to repair your game if you've made a mistake on the plugin front, quickly restoring the plugin state to a known good without needing to download the whole pack again.

About rotation point, yes there are keyboard shortcuts, don't remember them at the top of my head, especially as I'm using 3 keyboard layouts, so kinda just press around till I get what I want

and as for interacting, I don't believe so, I haven't seen such a thing documented nor discussed, and I don't believe I've triggered such a thing during testing.

 

[SimulatedFantasyHero]

Just ignore it, it's indeed deep in the system. Bleeding edge is pretty much my working folder, so things are kinda just stuffed in there and shuffled around as I work. I take no care in making that folder user friendly, as... well... it's my workspace, not meant for release, thus why you have to accept a warning to use it.

you can replicate my setup to get the same experience I have though if you really want it, as I always have my game on C:\Illusion\HoneySelect2, or you can grab whatever you want at

You must be registered to see the links

Thank you for asking people to look at the std_hairpack-highlights thing.
the new one I'm starting to see since DX 3.1 is:

2x [Warning: Unity Log] The referenced script (EyeAdv_AutoDilation) on this Behaviour is missing!
2x [Warning: Unity Log] The referenced script on this Behaviour (Game Object 'compatible') is missing!

Any "tear down" are probably my memory starting to get throttled I'm guessing.
Error : Unity Log] Can't remove RectTransform because LayoutElement (Script) depends on it
It's a minor hiccup with the file explorer inside the main room and character maker.

Does anyone use Velocitry.dll anymore? I keep seeing that "WARN:RUE Vectrosity.dll is not available, drawing gizmos will be disabled." I think it's been around the since the AI*Girl days.

You must be registered to see the links

You must be registered to see the links

I think it was something used to tie in for VR menus right for simple overlays?

 

[SimulatedFantasyHero]

There's a reason BAT and CMD files are out of fashion, people don't trust it. Blame Hollywood

I always play high energy techno music and use CAD/CAM software to design my Trogans. Guys, if I go please share my porn dir but destroy my hard-drive. the password to the computer is Swordfish

 

[alex2011]

thanks, that's great about the plugin.

about the 7z update, I was just thinking it would be cool to have a 7z of the modified files and a bat file to delete the files that need deleting. That should cover everything. Uncompress the 7z overtop of the game directory, then run the bat and you are good to go.

can you help with the following questions:

How do you rotate a girl by where you click or the centre of the model? This gets messed up after using left and right button to move around in the scene I think. After that point, it rotates around some point in space that moves the model out of view and I haven't found a way to get back to the rotation around the centre of the model.

is there a way to touch the models via a virtual hand or something during scenes or are you just observing the animation in the scene and control the speed?

how is saving done per girl. is it stored in the original card, in a duplicate card or another file?

if you modify a card while using it, what changes in your group/game?

thanks for all your work

Saving is done to the card itself and no modifications can be made to a card inside a group because it specifically blocks access to cards in use since it is almost constantly writing data to the card while playing. If you were to modify the card while it is in use, because of the near constant flow of data, you would risk corrupting it entirely.

 

[Sepheyer]

is there a way to reset the rotation point of what you are rotating around? Sometimes the rotation point moves away from the girl during creation.

is there a way to interact with the girl directly via your cursor or are you just watching the animation with limited control?

Here is a link to the rotation point explanation:

https://f95zone.to/threads/illusion...-help-guides-thread.66252/page-2#post-5999114

Girls are non-interactable. One exception - hit "M" (at least in the Studio Neo application) and now their tits and buns will jiggle when you cursor over them.

 

[fnnn]

I delete it to replace it with the new one. A lot of users play around with the Optional mods folder, so resetting it makes it all available again after updating. Basically resetting the pack state to a known good means that existing optional mods are removed from the game, so need to restore the optional mods folder to allow the user to install it all over again.

This all is a gigantic exercise in addressing all scenarios for all users as best as can be done, so I'm taking into account normal changes users do to the pack after extracting it, like messing with the optional mods folder and adding or removing mods, sometimes to not great results

As a result from this approach, using the updater may also be used to repair your game if you've made a mistake on the plugin front, quickly restoring the plugin state to a known good without needing to download the whole pack again.

About rotation point, yes there are keyboard shortcuts, don't remember them at the top of my head, especially as I'm using 3 keyboard layouts, so kinda just press around till I get what I want

and as for interacting, I don't believe so, I haven't seen such a thing documented nor discussed, and I don't believe I've triggered such a thing during testing.

sorry, I meant that you delete the optional mods but i didn't see where you copy them back

 

[fnnn]

Saving is done to the card itself and no modifications can be made to a card inside a group because it specifically blocks access to cards in use since it is almost constantly writing data to the card while playing. If you were to modify the card while it is in use, because of the near constant flow of data, you would risk corrupting it entirely.

thanks for the explanation.

So what happens if you use a card from a custom directory. Is the original card modified or a copy is made?

is the corruption an issue if you are in create mode and not running two instances of the game?

What if you remove the card from the group and then edit it in create mode, does that translate back into the game if you add the girl to the group? do you lose all the stats with the girl that you built up during gameplay?

 

[fnnn]

Here is a link to the rotation point explanation:

https://f95zone.to/threads/illusion...-help-guides-thread.66252/page-2#post-5999114

Girls are non-interactable. One exception - hit "M" (at least in the Studio Neo application) and now their tits and buns will jiggle when you cursor over them.

thanks

i'm asking about rotation getting messed up in create mode. I think if you use left and right mouse buttons to move at the same time. the post seems to be for the scene creator.

 

[alex2011]

thanks for the explanation.

So what happens if you use a card from a custom directory. Is the original card modified or a copy is made?

is the corruption an issue if you are in create mode and not running two instances of the game?

What if you remove the card from the group and then edit it in create mode, does that translate back into the game if you add the girl to the group? do you lose all the stats with the girl that you built up during gameplay?

I haven't tried, I usually move the card into the main male/female directory, but if I had to guess, it probably would write to the existing card, maybe make a copy temporarily in the main folder to act as a sort of conduit.

You should never be running two instances of the game, that has got to play hell with resource usage anyway. As for create mode, you still won't be able to save to the card at all. You can create a completely new card, but that's it.

If you remove a card from a group, yes, you should be able to edit it again as it is then removed entirely from the game. Since even stats from actions in game are saved to the card, if you were to take it out of the group and put it back in without editing, it would continue as it was when it was removed, but editing is supposed to clear all in game information, so if it saved correctly, you should be starting completely fresh. That said, not saving correctly in this specific case is not the same as not saving correctly if, for example, you were creating a brand new card. Saving to an existing card and it not saving correctly usually just means the data didn't get cleared from its last time in game, saving to a new card and it not saving correctly would more likely lead to total corruption and inability to use the card in game without overwriting the corrupt data.

 

[fnnn]

I haven't tried, I usually move the card into the main male/female directory, but if I had to guess, it probably would write to the existing card, maybe make a copy temporarily in the main folder to act as a sort of conduit.

You should never be running two instances of the game, that has got to play hell with resource usage anyway. As for create mode, you still won't be able to save to the card at all. You can create a completely new card, but that's it.

If you remove a card from a group, yes, you should be able to edit it again as it is then removed entirely from the game. Since even stats from actions in game are saved to the card, if you were to take it out of the group and put it back in without editing, it would continue as it was when it was removed, but editing is supposed to clear all in game information, so if it saved correctly, you should be starting completely fresh. That said, not saving correctly in this specific case is not the same as not saving correctly if, for example, you were creating a brand new card. Saving to an existing card and it not saving correctly usually just means the data didn't get cleared from its last time in game, saving to a new card and it not saving correctly would more likely lead to total corruption and inability to use the card in game without overwriting the corrupt data.

that's what i thought, thanks.

 

[ScrewThisNoise]

sorry, I meant that you delete the optional mods but i didn't see where you copy them back

Ah, sorry, here's the contents of the root folder
Can't upload here for some reason, so link instead I guess:

You must be registered to see the links

 

[fnnn]

Ah, sorry, here's the contents of the root folder
Can't upload here for some reason, so link instead I guess:

You must be registered to see the links

cool.

How do you bundle the files along with the exe in the update?

 

[Iluha]

Is this problem not being solved yet? or is it artifacts due to my graphics card?

Spoiler

You don't have permission to view the spoiler content. Log in or register now.

 

[alex2011]

Is this problem not being solved yet? or is it artifacts due to my graphics card?

Spoiler

You don't have permission to view the spoiler content. Log in or register now.

Looks like her body size slider is a bit too far on the large side to me. That would mess up the animations like that. Just to be sure, does it affect any vaginal position where she's not either laying down or on top of the guy, like doggy, or does that look okay.

 

[ScrewThisNoise]

cool.

How do you bundle the files along with the exe in the update?

how... it's packed into the exe... so that it can install it... how else would I do it?
It's not super advanced, just checkout NSIS if you're wondering about the basics of NSIS.

I'm working on phasing out NSIS though, so none of this is valid for much longer, but ofc the files get bundled in the installer itself so that the installer can actually do its job. I don't know how much more I can say... you've seen the folder bundled and the script that's used to compile the installer. Nothing much more I can say about the installer.

If you still don't trust it, sorry, but either you're on your own or you need to download the full 7z archive to update. I won't distribute a 7z and bat bundle ever again, that didn't end well when I did it, so not gonna do it again. Nor do I plan to use double the time to design the updater, having one installer and one 7z/bat for every update. There isn't demand for the latter, I don't like it and people think cmd = virus. there's literally no upside to doing it that way.

I'm plenty open to explaining what I'm putting in the installer and what exactly it's doing, and I even give the source on request like I did here, that would be the fifth or so time I've gotten a source request, and all times I've given it. And NSIS is incredibly easy to reverse engineer, so I don't imagine doing anything dodgy there would go under the radar.