Unity Completed Honey Select 2 [DX R16] [Illusion]

[Mtkkiller27]

Not quite correct, cuz as you (and I) can see the body skin seems to load fine now.
Similar to 3dgamer sometimes I recognized that Hanmens face doesn´t load automatically, so you have to activate by yourself and save the card again.
View attachment 2250113

Hanmen shader 2.0 is NOT part of the Sideloader Modpack and should be in mods/MyMods.
The NextGenShader 1.8.5 is in Sideloader Modpack but for me never made troubles running parallel, but for safety´s sake I delete it after new install.
Don´t delete if you don´t have the Shader 2.0!

Is the body skin really loading fine ?
3dgamer55 body doesnt look as "veiny" as the one i get:


What about this then, the face loads fine but not the body:


You can see in both screenshot they got the right "shaders", changed for another shader back to the Hammen one with no succes.

And i have only this in Mods/My mods:

 

[Velcrofly]

View attachment 2251163
Now what the fuck is this shit
How the fuck does that have ANYTHING to do with LOS
Christ
Whoever did those translations better not be getting paid, because this is google translate level of bad. They didn't even bother using something decent like DEEPL.io
And if these are the accurate asian translations, their common sense failed them, because they should've just kept the old ones if this is what they are called in Japanese or whatever....

Line of Sight is now how you define what the Eyes are looking at. Can't remember what it was called before but obviously made more sense.

 

[Mtkkiller27]

Is the body skin really loading fine ?
3dgamer55 body doesnt look as "veiny" as the one i get:
View attachment 2251515

What about this then, the face loads fine but not the body:
View attachment 2251517

You can see in both screenshot they got the right "shaders", changed for another shader back to the Hammen one with no succes.

And i have only this in Mods/My mods:
View attachment 2251520

Also, when swapping the uncesor selector to another option,everything look ok for 1 sec and then goes back to the shit i posted above

 

[Kaseijin]

Line of Sight is now how you define what the Eyes are looking at. Can't remember what it was called before but obviously made more sense.

Used to be "Gaze"

 

[Kaseijin]

View attachment 2251163
Now what the fuck is this shit
How the fuck does that have ANYTHING to do with LOS
Christ
Whoever did those translations better not be getting paid, because this is google translate level of bad. They didn't even bother using something decent like DEEPL.io
And if these are the accurate asian translations, their common sense failed them, because they should've just kept the old ones if this is what they are called in Japanese or whatever....

I feel you :/
In this thread https://f95zone.to/threads/honey-select-2-dx-r11-illusion.53457/post-9648619
Talk abuout a text.zip file going on BepInEx\Translation\en\Text\
Well, if you open that zip file, in it there are text files with the translations. Example: In "studio" folder, there is a file named Studio.txt, and in it are:
//
// Animation Menu -> Kinematics
//

FK=FK
IK=IK
視線=Gaze
首操作=Neck
眉・目・口=Face
手=Hands
ポーズ=Pose

My question is:
Can I do and customize my OWN localization? or the game doesn't allow that and we have to suffer such a bad translations?
any help is welcome.

 

[3 0 1 2]

My question is:
Can I do and customize my OWN localization? or the game doesn't allow that and we have to suffer such a bad translations?
any help is welcome.

Whatever translation you change in that Text.zip file will be used by the translation plugin for the game.
You can try my attachment and check the changes in personalities and traits.

So, yes, you can make your custom translation

 

[Deleted member 5117808]

Is the body skin really loading fine ?
3dgamer55 body doesnt look as "veiny" as the one i get:
And i have only this in Mods/My mods:
View attachment 2251520

alright quick recap:
1.delete hanmen next gen skin 1.8.5 from AI.Shoujo\mods\Sideloader Modpack\Hanmen (this caused me problems)
2.download these files

You must be registered to see the links

You must be registered to see the links

You must be registered to see the links

You must be registered to see the links

3.copy the contents in your game folder , it should look like this in the mods folder

4.you should be good now

 

[Kaseijin]

alright quick recap:
1.delete hanmen next gen skin 1.8.5 from AI.Shoujo\mods\Sideloader Modpack\Hanmen (this caused me problems)
2.download these files

You must be registered to see the links

You must be registered to see the links

You must be registered to see the links

You must be registered to see the links

3.copy the contents in your game folder , it should look like this in the mods folder
View attachment 2252428
4.you should be good now

In my case, The Next gen Shader V2.0 causes my potato PC crash, along with the "Next gen skin". so I vanish it from my machine.

 

[Kaseijin]

Whatever translation you change in that Text.zip file will be used by the translation plugin for the game.
You can try my attachment and check the changes in personalities and traits.

So, yes, you can make your custom translation

TNX!
I'll give a try once I reach my home, I'm away for now.

 

[HardcoreCuddler]

Hey Guys. I`m new around here. Usually I don`t ask stupid questions about various problems since they can be resolved by simply searching said problem with a very high probability finding a fix. Anyway, today is the day I can`t find a fix so I ask you guys for some help, ideas, workarounds...
As you can see in the gifs I posted, Test1 is a card that I downloaded from the web and Test2 is something that I started form scratch. Thing is that, apart form the head, anything else is just copy/paste between this cards. I just what to replicate the same effect form Test1 to Test2, ze boobz physics. I`m using R11, everything is updated. Played around with Jiggle mods values, fairbear`s Boob settings values, checked/rechecked installed mods etc... Nada, ziltch. I simply can`t pinpoint the issue.. A few hours ago I reinstalled the hole damn thing.
Anything that can help would be much appreciated.
Cheers!!

man I have no fucking clue but I've seen other people have this problem.
best bet would be to turn on the console (tick the checkbox in the initSetting.exe in game root folder) and see what it says

 

[HardcoreCuddler]

Line of Sight is now how you define what the Eyes are looking at. Can't remember what it was called before but obviously made more sense.

it was called Gaze...and that is literaly defined as what the eyes are looking at, whereas LOS defines what something can see and how far / wide they can see

 

[barricadeOne]

man I have no fucking clue but I've seen other people have this problem.
best bet would be to turn on the console (tick the checkbox in the initSetting.exe in game root folder) and see what it says

Yeah.. Fuck it!
So, i finally found the problem. After activating the console, it turns out that the problem is HarmonyX which requires an update. The issue is that HarmonyXInterop is found in BepinEx core folder and since it`s updated(BepInEx) there is nothing that can be done for now at least, until BepInEx 6.0.0 is fully ready. Until then I found a fix for my original characters. Just work on something we downloaded form the web and then change the name, traits etc with CharEdit. Easy!

Edit. Actually CharEdit lets you modify almost anything apart from the name. Another workaround is to replace default character in the Character Replacer plugin.

 

[turbojoe]

Followed what was in the txt file, aint workin
View attachment 2248554
Looks like the skin is the wrong one too.

Is the body skin really loading fine ?
3dgamer55 body doesnt look as "veiny" as the one i get:
View attachment 2251515

What about this then, the face loads fine but not the body:
View attachment 2251517

You can see in both screenshot they got the right "shaders", changed for another shader back to the Hammen one with no succes.

And i have only this in Mods/My mods:
View attachment 2251520

Ok - I tried your cards on my laptop where I have a parallel original R11 installation for testing without any of my extra mods.
The result is, that these cards indeed don´t work well with the Repack included old Hanmen Shader 1.8.5.

So best advise is as 3Dgamer answered you here https://f95zone.to/threads/honey-select-2-dx-r11-illusion.53457/post-9659727
These downloaded zipmods should be stored in mods/MyMods.

Belonging veins visibility look here https://f95zone.to/threads/illusion...lect-2-card-sharing-thread.44248/post-7427205

 

[Mtkkiller27]

alright quick recap:
1.delete hanmen next gen skin 1.8.5 from AI.Shoujo\mods\Sideloader Modpack\Hanmen (this caused me problems)
2.download these files

You must be registered to see the links

You must be registered to see the links

You must be registered to see the links

You must be registered to see the links

3.copy the contents in your game folder , it should look like this in the mods folder
View attachment 2252428
4.you should be good now

Ok - I tried your cards on my laptop where I have a parallel original R11 installation for testing without any of my extra mods.
The result is, that these cards indeed don´t work well with the Repack included old Hanmen Shader 1.8.5.

So best advise is as 3Dgamer answered you here https://f95zone.to/threads/honey-select-2-dx-r11-illusion.53457/post-9659727
These downloaded zipmods should be stored in mods/MyMods.

Belonging veins visibility look here https://f95zone.to/threads/illusion...lect-2-card-sharing-thread.44248/post-7427205

Doing this did work, thx for the help.
Now that this is taken care of, does the game have genital sliders for female ? I know male don't but what about female, and is there a way to "fix" animation alignement with big character ?

 

[turbojoe]

Doing this did work, thx for the help.
Now that this is taken care of, does the game have genital sliders for female ? I know male don't but what about female, and is there a way to "fix" animation alignement with big character ?

Yes there is in Lower Body section:
First activate XYZ sliders

and there you go

 

[khamphetlao]

my option i cant find item+ Studio item entended menu


i crop icon and menu box from hooh tutorial
all hooh dll i input to BepInEx\plugins
all hooh item dick i input to mods\MyMods
where did i miss

 

[Kaseijin]

View attachment 2255163
my option i cant find item+ Studio item entended menu
View attachment 2255168
View attachment 2255167
i crop icon and menu box from hooh tutorial
all hooh dll i input to BepInEx\plugins
all hooh item dick i input to mods\MyMods
where did i miss

Do you have the Hooa Utillity dll? and the Aura2_core.dll in Bepinex\plugins?

Spoiler: setup

You don't have permission to view the spoiler content. Log in or register now.

Mine works fine, I have this setup:

 

[khamphetlao]

Do you have the Hooa Utillity dll? and the Aura2_core.dll in Bepinex\plugins?

Spoiler: setup

You don't have permission to view the spoiler content. Log in or register now.

Mine works fine, I have this setup:

 

[khamphetlao]

unity i thing so few

i Haven't updated for a long time this's it relevant?

 

[Mr-Fox]

Yes there is in Lower Body section:
First activate XYZ sliders
View attachment 2255076
and there you go
View attachment 2255077

And also if you open ABMX and search "kokan" for front and "ana" for back you can adjust tilt and offset etc.