[ILLUSION] AI Girl and Honey Select 2 - Card Sharing Thread

[Deleted member 3327602]

Dude, I love your group's face talents, but.. what the actual fuck? Why do so many of your girls look like... this? It looks like her measurements are 35-20-22 or something. She's got little alien hips and scoliosis.

And it's not a simple thing to change either! There's a LOT of bonemod going into getting those weird tiny-yet-sharp-looking pelvis bones.

View attachment 1967848 View attachment 1967850

HAHAHA! Yep! Less blowup dolly...


I think the real Mattie has pretty small hips. If you see some of her snaps wider its because they PSed her ass. But I can widen her a bit, too:

My concern on your load of her however is Mattie's eyes!! That looks like a glitch in one of the custom faces. If you load certain custom heads after loading an initial card, their eyes will be spaced too far apart. The fix is a simple reload, and thankfully only happens in Maker. If you have the old zipmod for her custom head, try her "wider" business here:

 

[Sepheyer]

HAHAHA! Yep! Less blowup dolly...
View attachment 1967977

I think the real Mattie has pretty small hips. If you see some of her snaps wider its because they PSed her ass. But I can widen her a bit, too:
View attachment 1967994
My concern on your load of her however is Mattie's eyes!! That looks like a glitch in one of the custom faces. If you load certain custom heads after loading an initial card, their eyes will be spaced too far apart. The fix is a simple reload, and thankfully only happens in Maker. If you have the old zipmod for her custom head, try her "wider" business here:
View attachment 1967990

Sexy.

Spoiler: Screenshot

You don't have permission to view the spoiler content. Log in or register now.

 

[Sepheyer]

Someone on discord ran a fusion between their two cards:

Spoiler: Chara Cards Here

You don't have permission to view the spoiler content. Log in or register now.

 

[CttCJim]

HAHAHA! Yep! Less blowup dolly...
View attachment 1967977

I think the real Mattie has pretty small hips. If you see some of her snaps wider its because they PSed her ass. But I can widen her a bit, too:
View attachment 1967994
My concern on your load of her however is Mattie's eyes!! That looks like a glitch in one of the custom faces. If you load certain custom heads after loading an initial card, their eyes will be spaced too far apart. The fix is a simple reload, and thankfully only happens in Maker. If you have the old zipmod for her custom head, try her "wider" business here:
View attachment 1967990

That one at least looks human. I have a whole archive of PATHOS cards and fully half or more have those weird hips that just remind me of this card:

 

[Ganfatrai]

Ok took me 45 minutes not 10, because i made several fusions. But see ? no more weird eyes. and the result seems fine to me.
View attachment 1966428

Spoiler: pictures

You don't have permission to view the spoiler content. Log in or register now.

Nice. Did you use the Madison Ivy card that I made in the fusion?
The face kinda looks similar to that.

https://f95zone.to/threads/illusion...lect-2-card-sharing-thread.44248/post-8700693
Edit: This one is really nice. I would have been happy if I had managed to make that!

 

[tretete]

Well ...
As I'm making some new characters, there's an issue I still can't resolve. I saw some guys making tiny characters and decided to make a Little Woman. The problem is in the deformation of the legs in certain poses and it can be seen in figures with different proportions. Has anyone found a solution for this?


... And here's a girl without problems :

Cordelia

Spoiler: Preview

You don't have permission to view the spoiler content. Log in or register now.

Big card -

You must be registered to see the links

Gallery -

You must be registered to see the links

 

[Deleted member 3236154]

Nice. Did you use the Madison Ivy card that I made in the fusion?
The face kinda looks similar to that.

https://f95zone.to/threads/illusion...lect-2-card-sharing-thread.44248/post-8700693
Edit: This one is really nice. I would have been happy if I had managed to make that!

Yes of course. You did the hard work, i just finished the job. Well, maybe it can still be improved but we are getting somewhere, i think. I wouldn't claim that card as mine.

 

[ppunter2015]

Fusion between several girls posted in this thread and the younger sister Mr Deluxe posted on Discord



Basis:

You must be registered to see the links

 

[Sepheyer]

Copy to game root to enable
Use ALT + F2

Excellent, this was excellent!

I saved a copy of the file in the tutorial thread:
https://f95zone.to/threads/illusion-hs2-studio-neo-chara-maker-help-guides-thread.66252/post-8706969

 

[Deleted member 3327602]

Well ...
As I'm making some new characters, there's an issue I still can't resolve. I saw some guys making tiny characters and decided to make a Little Woman. The problem is in the deformation of the legs in certain poses and it can be seen in figures with different proportions. Has anyone found a solution for this?
View attachment 1968152

... And here's a girl without problems :

I think that issue is because of the heels, not the shorter legs. Try a different less "high" pair & see if the ankle returns to normal. As you have done quite well in your example, although possible to have "visually" shorter girls, there will be other issues and "floating" depending on the BR version you use.

I think it is largely due to how the game(R10BR), instead of locking the feet to the ground(like my R3.2BR with older mods actually does), pulls them up into the "floating" air when you fiddle with the Whole Leg Scale Y slider. That's the worst and possibly an issue others will have when they load some of our older work on the latest Repack. See originally our workflow for legs was to always shorten that Y slider just a bit so the knees stop bending on the default idle-I so hate that bendy shit. Live and learn.

In any case, the reason for the floating is the latest Better Penetration.dll. If I replace just it with an older version in R10, no more floating on legs on the floor with less than 100 values on the Whole Leg Scale slider. Bare and flat shoed feet stick to the floor great. BUT then I lose my amazing high heel "align-to-floor" check box on the "N" keyboard shortcut menu. Heels just clip right through the floor again.

Bottom line, with so many potentials for BS, ALWAYS make your honey with a bit of height about them.

 

[lichkingnivek]

does anyone have a Android 21 majin form not a cheap one but a good one

 

[pot123]

Edited a card to create this:
Goth Raven (Teen Titans, DC)

Spoiler: Card

You don't have permission to view the spoiler content. Log in or register now.

Spoiler: Image I used for inspiration

You don't have permission to view the spoiler content. Log in or register now.

 

[tretete]

I think that issue is because of the heels, not the shorter legs. Try a different less "high" pair & see if the ankle returns to normal. As you have done quite well in your example, although possible to have "visually" shorter girls, there will be other issues and "floating" depending on the BR version you use.

I think it is largely due to how the game(R10BR), instead of locking the feet to the ground(like my R3.2BR with older mods actually does), pulls them up into the "floating" air when you fiddle with the Whole Leg Scale Y slider. That's the worst and possibly an issue others will have when they load some of our older work on the latest Repack. See originally our workflow for legs was to always shorten that Y slider just a bit so the knees stop bending on the default idle-I so hate that bendy shit. Live and learn.

In any case, the reason for the floating is the latest Better Penetration.dll. If I replace just it with an older version in R10, no more floating on legs on the floor with less than 100 values on the Whole Leg Scale slider. Bare and flat shoed feet stick to the floor great. BUT then I lose my amazing high heel "align-to-floor" check box on the "N" keyboard shortcut menu. Heels just clip right through the floor again.

Bottom line, with so many potentials for BS, ALWAYS make your honey with a bit of height about them.

Thank You.
I found it, thanks to a hint in your answer
When I shorten the legs I use only the Y-axis slider (72% in this case), and then fix the "cf_j_Hips"-bone ...
When the legs are smaller in X,Y and Z they need "re-sculpting", but the deformation in the ankles almost disappears. I'll also try the "girl-with-different-legs" in the game to see how it works.

 

[turbojoe]

I think that issue is because of the heels, not the shorter legs. Try a different less "high" pair & see if the ankle returns to normal. As you have done quite well in your example, although possible to have "visually" shorter girls, there will be other issues and "floating" depending on the BR version you use.

I think it is largely due to how the game(R10BR), instead of locking the feet to the ground(like my R3.2BR with older mods actually does), pulls them up into the "floating" air when you fiddle with the Whole Leg Scale Y slider. That's the worst and possibly an issue others will have when they load some of our older work on the latest Repack. See originally our workflow for legs was to always shorten that Y slider just a bit so the knees stop bending on the default idle-I so hate that bendy shit. Live and learn.

In any case, the reason for the floating is the latest Better Penetration.dll. If I replace just it with an older version in R10, no more floating on legs on the floor with less than 100 values on the Whole Leg Scale slider. Bare and flat shoed feet stick to the floor great. BUT then I lose my amazing high heel "align-to-floor" check box on the "N" keyboard shortcut menu. Heels just clip right through the floor again.

Bottom line, with so many potentials for BS, ALWAYS make your honey with a bit of height about them.

Very interesting explanation!

But if I understood right there seem no solution in the other direction: "LONG LEGS"

For example I got this amazing card of Elf Warrior Ivy from CHWxXx (

You must be registered to see the links

, character original from Dmytro Bajda)


These stunning proportions are a dream and surprisingly well working in game, but in some animations a little weird leg bending is detectable.
Here are the leg scales increased, but this causes the "bottom plate" being located in middle hight of the calves.


My theory is: if there is a way to move this "bottom plate" down under the feet as at standard Whole Leg Scale will help the animations and also rectify the body measurement datas.

If anybody know how to adjust this reference plane I would be very happy

 

[I92822]

hey guys, is there a way to create mods for this game from 3ds max's files.
This is minato's kunai i created a while ago. i searched for tutorials on to how to create mods but found nothing fruitful.
so i need a little help.
BTW what do you think about the renders below:

Spoiler: Kunai

You don't have permission to view the spoiler content. Log in or register now.

There still are some imperfections specifically in the jutsu formula but i am pretty much satisfied with the result.
i tried exporting the model in blender but it wasn't clean in there.

 

[tretete]

Very interesting explanation!

But if I understood right there seem no solution in the other direction: "LONG LEGS"

For example I got this amazing card of Elf Warrior Ivy from CHWxXx (

You must be registered to see the links

, character original from Dmytro Bajda)
View attachment 1969061 View attachment 1968975

These stunning proportions are a dream and surprisingly well working in game, but in some animations a little weird leg bending is detectable.
Here are the leg scales increased, but this causes the "bottom plate" being located in middle hight of the calves.
View attachment 1969023

My theory is: if there is a way to move this "bottom plate" down under the feet as at standard Whole Leg Scale will help the animations and also rectify the body measurement datas.

If anybody know how to adjust this reference plane I would be very happy

Somewhere around BR3 a guy shared some wisdom on making shorter legs (guess it works with longer ones too).After BR7 (I guess) the problem seemed to be solved but I still do this.
Earlier the legs were literally breaking in animated poses when you make them shorter.
So if you want, try it.
When you change the leg scale with -10% (from 100 to 90), also change the cf_j_Hips' X,Y and Z scales +10%.
Having in mind my previous problem, it's almost fine if the change is up to 15% ...

 

[Sepheyer]

hey guys, is there a way to create mods for this game from 3ds max's files.
This is minato's kunai i created a while ago. i searched for tutorials on to how to create mods but found nothing fruitful.
so i need a little help.
BTW what do you think about the renders below:

Spoiler: Kunai

You don't have permission to view the spoiler content. Log in or register now.

There still are some imperfections specifically in the jutsu formula but i am pretty much satisfied with the result.
i tried exporting the model in blender but it wasn't clean in there.

Did you check here:

You must be registered to see the links

?

 

[Deleted member 3327602]

Thank You.
I found it, thanks to a hint in your answer
When I shorten the legs I use only the Y-axis slider (72% in this case), and then fix the "cf_j_hip"-bone ...
When the legs are smaller in X,Y and Z they need "re-sculpting", but the deformation in the ankles almost disappears. I'll also try the "girl-with-different-legs" in the game to see how it works.

You are welcome, Trete! Music to my ears when someone I instruct learns and grows.

Very interesting explanation!
But if I understood right there seem no solution in the other direction: "LONG LEGS"
My theory is: if there is a way to move this "bottom plate" down under the feet as at standard Whole Leg Scale will help the animations and also rectify the body measurement datas.
If anybody know how to adjust this reference plane I would be very happy

No, just not really short ones. Not with the latest BetterPenetration dll present anyway. As I said, if you use say the attached "old" dll instead of the latest, you get an older UE in the Plugins screen, NO high heel support, and the feet seem to stick to the floor plate, allowing essentially short, long, etc legs--at least until you add heels.
There's no way I know to adjust the general "floor" location coordinate wise.

hey guys, is there a way to create mods for this game from 3ds max's files.
This is minato's kunai i created a while ago. i searched for tutorials on to how to create mods but found nothing fruitful.
so i need a little help.

Sure there is! I'm not certain if ANY other Illusion mod artisan uses MAX(they all looooovvvvve Blender(in childish accent). But yes, the easiest approach is to import an "exported" FBX accessory file another mod artisan has created & got working in game. You can learn alot from painstaking study of your buds' success.

How you import an "exported FBX" is to use a free app (included with the Better Repacks) called SB3Utility. It's made by this total dick burger over at IllusionSoft Discord but his/her/its app is pretty nice if you don't know/want to learn Unity also. Unpacking a zipmod, you find all its guts. The CSVs that tell the game what your mod is called, what its texture's name is, etc. The thumbnail.unity3d files are there, which provide a selectable icon for your mod in Maker, and you have the mod.unity3d file(s) themselves. These are how you get your first "exported" accessory FBX.
Sorry this is a total nutshell workflow. But essentially once you have imported an exported game asset into MAX, you can replace/skinwrap your new mod to its original structure, export FBX, import FBX into a brand new zipmod(or the one you're studying too). Whatever you can do to get your stuff in the game, do it to it, Pruitt. Then you can figure out how to make it all work pretty later.

 

[Moe Sizzlak]

Character Card 28 based on difdauf card

 

[I92822]

You are welcome, Trete! Music to my ears when someone I instruct learns and grows.

No, just not really short ones. Not with the latest BetterPenetration dll present anyway. As I said, if you use say the attached "old" dll instead of the latest, you get an older UE in the Plugins screen, NO high heel support, and the feet seem to stick to the floor plate, allowing essentially short, long, etc legs--at least until you add heels.
There's no way I know to adjust the general "floor" location coordinate wise.


Sure there is! I'm not certain if ANY other Illusion mod artisan uses MAX(they all looooovvvvve Blender(in childish accent). But yes, the easiest approach is to import an "exported" FBX accessory file another mod artisan has created & got working in game. You can learn alot from painstaking study of your buds' success.

How you import an "exported FBX" is to use a free app (included with the Better Repacks) called SB3Utility. It's made by this total dick burger over at IllusionSoft Discord but his/her/its app is pretty nice if you don't know/want to learn Unity also. Unpacking a zipmod, you find all its guts. The CSVs that tell the game what your mod is called, what its texture's name is, etc. The thumbnail.unity3d files are there, which provide a selectable icon for your mod in Maker, and you have the mod.unity3d file(s) themselves. These are how you get your first "exported" accessory FBX.
Sorry this is a total nutshell workflow. But essentially once you have imported an exported game asset into MAX, you can replace/skinwrap your new mod to its original structure, export FBX, import FBX into a brand new zipmod(or the one you're studying too). Whatever you can do to get your stuff in the game, do it to it, Pruitt. Then you can figure out how to make it all work pretty later.

i actually create renders for interior and exterior building design, like a bedroom or kitchen in 3DS MAX, so i have knack for it and sometimes i just create random stuff. i have started learning blender but i don't know i always try to learn these kinda stuff when my exams are going on (xD). and thanks for your help