VN Ren'Py A Wife and Mother [v0.211] [Lust & Passion]

[hzjujk]

I wouldn't say scummy but everything is done in bad faith with this dude.

But now they are completely freaking out! I mean, I can understand that you have reservations about L&P, L & P triggered you by insulting you badly and below the belt, but making him THE LIGHTBRINGER is pretty tough. They take every utterance from L&P and every action and twist it until it fits their view of the world. You are not yet perfect, but you are already a good demagogue. And even if there wasn't anyone who would contradict you in this forum, you would take every positive feedback in favor of the developer, every straw that keeps the conflagration burning, in order to then get involved in a discussion with you again, to get started again.

 

[Deleted member 4063857]

No buddy I'm just a judge and saw you as a great candidate for paralympic gymnastic given all the tumbling you do depending on who shows up on thread.

Now stop wasting everyone's time with your unfunny posts.

Hmmm... Actually it is you who's wasting everyone's time.

Starting from the bottom paragraph, more....

Oh boy oh boy DID WE JUST COME FULL CIRCLE t3alqdansam ?

Taunting? Do you mean confronting with him the fact that he can't keep the patreon promises he set out in order for people to fund him more?

That's bull shit, stop talking about things you...

I wouldn't say scummy but everything is done in bad faith with this dude.
He goes and changes his patron from USD to

That absolutely fails to answer the question: Do you even know what batch rendering is?

And there you are again parroting what he says

Are you trying to qualify for the paralympics with your participations in this thread?

Right now? Reading the unfunny jokes of a

I was having a discussion about rendering,

>complains about meaningless discussions
>5 min later gets into one

damn that brain must be so smooth

Please don't say you were discussing/replying because we all know that's not the case here.

 

[L&P's Father-in-Law]

If only you knew how to read English properly, you would have seen this in the previous message and also would have been able to interpret what L&P's message said. Alas, it is what it is.

Now back to topic. I know rendering is that last thing that needs to be done. But when a lighting is setup for the entire scene, it does not look proper in each and every render because of change in angles. That's what I assume happens.

Now if L&P renders them all together, those errors remain. Once the 1st render is done he gets a very clear idea of how the lighting is, now just before rendering the next render with a different camera angle he might notice where exactly to make adjustments based on his first render and his experience. If he does render it and sees that it is not coming along right, he would make the necessary adjustments and re render it.

Just Before Rendering Or At The Time Previewing the renders he sees where the light needs adjustments he makes the changes. Now if done in batch Rendering it still doesn't change the fact that he still needs to check the renders for adjustments based on the previews. If given to someone else they would not be able to correct it. If he has to check them anyways then it doesn't make a difference whether he batch renders it or does it one by one. Infact here he checks one render and starts the render and goes to checking the next one.

And some of the experienced people of the fan art thread can definitely "shed light" here as to why he cannot do it in batches. Some of them did seem to agree with L&P's words regarding this. So you all who know the technicalities can correct me as well. And please I would require someone with more than 50h of experience on Daz minimum.

in general I am curious to know more about rendering and scene creation, so I am okay with any answers

You say you don't know. You spent 0 time trying to know and trying to see for yourself but still you call me out? Shame has no boundaries it seems.
If you don't know why are you throwing those justifications in the air for L&P instead of asking?

First of all, you can preview a render and that preview is pretty good in terms of what will show up. I could fire up daz rn, render something and post the render here and the picture of the preview and you guys would see that any blatant mistake will show up right away.
Depending on how much time you let it go, the quality varies but you can get really good previews, like close to a final render. You can see everything there, from lights to clipping issues to.. well, everything. You can preview those lights before rendering that "file" (let's call it like that).

Now, different light systems. That's all fine, it's just like a prop, and here you have 2 options to deal with this, from the top of my head. 1, you create a file for each "scene" meaning lets say you have Sophia talking with Patricia and 20 different cameras, poses, lights. You create 20 files that store those things differently and thats its, it stays saved. You don't need to render any of those but you should preview them before saving, as everyone does. And when you preview you get like 90% of what everything is going to look like. When does batch render enters the process? Now, with all files saved, you can just click batch render, add a render settings file to it (in case you want the same settings in every render, else itll use the settings in the render file) and the computer will do the rest which is, render all those 20 "scenes" and put them in a pretty nice folder for you.
That's the most basic way to do it.

There's better ones using the animations tab, for instance ,lets say you have 20 moments in the animation tab, numbered from 1 to 20 and then instead of having 20 files, each of those moments is one of those 20 files, with all the poses, light systems etc etc. It can make for a huge scene in terms of assets added but you can just write some script, or download one and then render each of those moments.
And these are just 2 ways to tackle that, I'm sure actual pros have their (much better) ways.

The point is: batch rendering has nothing to do with being able to spot mistakes or not because batch rendering is just the act of rendering the scenes in a batch. The mistakes spotting comes before that.
And if L&P needs to render in order to spot a mistake, he's either dumb and doesn't have a good process set up after 4 years, or he's deceiving you if he justifies it with that.

The second point is: stay away from conversations where you don't grasp one bit and aren't interested in knowing either, you're just interested in throwing shade.

 

[L&P's Father-in-Law]

Hmmm... Actually it is you who's wasting everyone's time.












Please don't say you were discussing/replying because we all know that's not the case here.

>"Please don't say you were discussing/replying because we all know that's not the case here."
>I check every post you gave as an example
>I see I'm replying on every post
>"Please don't say the truth"

Were you drinking Milf__lover?

 

[Juaum1]

it's easier sofia to kiss those kids than to kiss sam

 

[Deleted member 4063857]

Progress Report. Ver. 0.150

95% - 90%
15% - 0%

View attachment 1451240

lockerxx ??

 

[BRTT]

 

[Old Dog]

Hence forth, I asked people who render regularly to give Thier insights.

I don't know how this saves much time, because if he has to make the adjustments any way. And he does it after the creation scene. Then all that's left is to hit the render button. Whether he does it for one render and in the mean time moves to the next one Or if he checks all first and then hits the render button, does it really make a difference. The scenes get rendered fast anyways. Most likely even before he finishes the work on the next one. What consumes the time is the adjustments, so is batch Rendering effective in the scenario, doesn't look like to me.

There are errors that will not show up till after the rendering is done,even when NVIDIA Iray is used

 

[momojean]

I am here few days. You got into meaningless arguments one after another. Why do you fail to think you are the one wasting others' time and space. Did you lose your job recently? Stop painting this thread with your whining!!! This thread does not exist for you!!! Go play the other game!!!

A few days are not enough to understand what is going on here. So regurgitate your vomit and avoid taking sides when you haven't understood shit. only fools do that.

 

[Atton563]

There are errors that will not show up till after the rendering is done,even when NVIDIA Iray is used

I've had to render the same scene around 4 times today because the lighting just won't come out right even after staring at previews.

 

[L&P's Father-in-Law]

I've had to render the same scene around 4 times today because the lighting just won't come out right even after staring a previews.

I understand that, I've also had to render again because even though some clipping issues showed up on preview but I completely missed them.
That's 1 render, just as yours looks like 1 scene.
If that happens in every scene and every render, then you have an issue.

 

[Whitenicky]

 

[L&P's Father-in-Law]

There are errors that will not show up till after the rendering is done,even when NVIDIA Iray is used

I'm yet to see one of those errors (that arent human errors) and would like an example if possible. But if you're having those on every render you do, then it's an issue to solve, it's not an issue to skirt around by 10x'ing your work time (on the render part).

 

[sept0342]

Progress Report. Ver. 0.150

95% - 90%
15% - 0%

View attachment 1451240

I don't think the event will be finished by Thursday as he said.

 

[L&P's Father-in-Law]

it's easier sofia to kiss those kids than to kiss sam

On the next second job update Sophia will be deepthroating those kids.
"It's just to show them how it feels"

I don't think the event will be finished by Thursday as he said.

All scenes except the last little one are done and rendered.
Currently there are 833 renders for all of them. The "Cathy/Andy" event will be a rather small one and I'm hurrying to finish it next week around Thursday. Then I need to do something in my private life and continue the art editing on Saturday. Tuesday will also be a day where I won't be able to work. But from Wednesday 19 on I will just work on the last part of the update.
So, next week you'll get the last teaser and I'll also announce an approximate release time span for update 0.150


Calling Talcum Powder to update his chart.

 

[lockerxx]

Progress Report. Ver. 0.150

95% - 90%
15% - 0%

View attachment 1451240

is moving!!!

 

[Notretsam]

View attachment 1451286

new update end of November, beginning of December is my guess.

So no follow up to the last update until March/April 2022.

 

[L&P's Father-in-Law]

What DLC are you guys expecting this time?
I expect the car scene with SAM to have a route called the BANGMOBILE DLC.

Also petitioning L&P to change the muscle car to a jeep and have Sam put this on

 

[VanDarkBalls]

On the next second job update Sophia will be deepthroating those kids.
"It's just to show them how it feels"

Although this event breaks the plot, but I think it will definitely not come to a blowjob, if we take the genre as a whole, they will touch her somewhere to the maximum, she has never been touched, except that one of them poked her in the chest, I'm just more than sure, as long as the emphasis is on her breasts, something will be connected with her breasts, maybe they masturbate to her bare breasts, and end up in a condom
Maybe she will be touched in the end, but it's definitely far from a blowjob

 

[Notretsam]

What DLC are you guys expecting this time?
I expect the car scene with SAM to have a route called the BANGMOBILE DLC.

Also petitioning L&P to change the muscle car to a jeep and have Sam put this on

Your post suggests there already been a DLC? far as I'm aware there isn't, unless I missed something.