Unity Heat [v0.6.5.2] [Edef]

4.40 star(s) 27 Votes
Discussion Reviews (27)
burningburner622

burningburner622

Newbie
Jun 25, 2021
77
129
_SP_ said:
In case of contact failure, using WD-40 can be a solution. BUT! If you watch the repair video, you will see that there is little chance of this!
You must be registered to see the links

View attachment 2310563 View attachment 2310576
Moreover WD-40 mostly contains paraffin, which is not exactly good for the panel varnish layer.

View attachment 2310590
Furthermore drifts can also be caused by the spring under the stick which when weakened! <- I had this problem too.
And this problem is not solved by the contact spray!
(I also stretched the spring a little and since then everything is fine again)
Click to expand...
nice to hear that ur controller is working properly again, i got my advice from the beatsaber community and the most common point of failure is dirt and grease on the in the vid mentioned contacts, did not even think about other points cuz the first thing i tryed worked flawlessly, will edit my comment
 
  • Like
Reactions: _SP_
burningburner622

burningburner622

Newbie
Jun 25, 2021
77
129
shoe_consumer said:
the game says it cant detect a headset despite oculus and steam vr working perfectly
Click to expand...
i think u need to be logged into a meta account, oculus accounts are not working anymore iirc, i cant play vr atm cuz im running windows in a vm, therefore im not even able to test it, maybe someone here could help me with that xd
 
S

_SP_

Newbie
Jan 17, 2021
44
66
burningburner622 said:
nice to hear that ur controller is working properly again, i got my advice from the beatsaber community and the most common point of failure is dirt and grease on the in the vid mentioned contacts, did not even think about other points cuz the first thing i tryed worked flawlessly, will edit my comment
Click to expand...
Please don't get me wrong, i didn't mean to tell you off!
I just wanted to provide useful information.

200w.gif

And it is completely understandable that many people are not technically minded.
Basically, i didn't want to disassemble the controller either.
Moreover, the phone repair kit is essential for disassembly... (What is also not an apple household device.)

It has become so useless for me that there was nothing to lose if i mess it up while disassembling.
OCR-01.jpg OCR-02.jpg OCR-03.jpg
Fortunately (thanks to the right tools), minimal traces of the repair remained.
 
  • Like
Reactions: burningburner622 and AsteroidIceSparkle
B

Beschderman

New Member
Aug 23, 2018
11
9
Hello Folks,

I was looking for a folder with custom poses and couldn't find one. So I decided to finally make one for everybody.
I did not make any of these poses, they were all created by 1xz and this folder is just a combined collection of all his sets.
I tried my best labeling them with the room they play in and the characters involved.
Note that I refere to the Locker Room in these names as Bath!!

For example: Marinas pose "Frottage(Bedroom + Riley)." means the pose plays in the Bedroom with Riley.
So to access the full pose you need "Frottage(Bedroom + Riley)" for Marina and "Frottage(Bedroom + Marina)" for Riley.

Poses that are labeled as "...(Rpose6) (... + Riley) mean that you have to use the normal pose 6 for Riley.

Again, these were not made by me and all credit goes to 1xz.

To install the poses simply unpack the .rar file and drag the Folder into \Heat_0.4.5.2_Milestone.

!!! IMPORTANT !!! IF YOU ALREADY HAVE YOUR OWN CUSTOM POSES DON'T "REPLACE" THE FOLDER AS THEY WILL GET LOST.
 
  • Like
  • Red Heart
Reactions: Aswiri, Random_BlackWolf, Trevolus and 3 others
You must log in or register to reply here.
Top Bottom
4.40 star(s) 27 Votes