ZiddyFiddy
Newbie
- Dec 20, 2022
- 15
- 8
uuuhhhh yeeeeaaaa you may have been getting very bad performance ovarall because of that. Some games may have just become playable to you nowended up finding the issue, my GPU was on a PCIE 8x slot, apparently whatever engine Honetselect 2 uses is effected by this. So i changed it to PCIE 16x slot and it works perfectly smooth at 88% GPU usage.
Kind of weird considering Room Girl works completely fine with the PCIE 8x slot
welll...not sure we can really call them issues since GFX cards are not at all designed to run on anything besides the best slots in a moboVery interesting discovery - til now we had similar issues with Series 3xxx cards:
https://f95zone.to/threads/honey-select-2-dx-r11-illusion.53457/post-8283699
https://f95zone.to/threads/honey-select-2-dx-r11-illusion.53457/post-8378904
https://f95zone.to/threads/honey-select-2-dx-r11-illusion.53457/post-8384386
I build a lot of pc's too, 8x hasnt ever effected performance that bad before, im still just confused as to why HS2 and AIS need so much bandwidth, because when i would hit 100% it wouldnt just cap off, it would actually slow down my whole system and stutter everything, i hope other people can find this fix too though, since its literally a hardware placement issueuuuhhhh yeeeeaaaa you may have been getting very bad performance ovarall because of that. Some games may have just become playable to you now
welll...not sure we can really call them issues since GFX cards are not at all designed to run on anything besides the best slots in a mobo
Hi STN - what has become of this theme? Did you find any reason for these unexpected fps drops?I have gotten a lot of reports about HS2 and AIS performing worse on 30 series cards than on 20 series cards... no idea what's going on with that. Hopefully I will get my 3090 soon (reports have been regarding 3080 and 3090, and it sounds absurd that those cards should have problems with these games...) so that I can verify the problems, and hopefully look into what's causing it...
If you "save new" a card all stats are resetted to zero.Hi.
so a while back i was having the issue that character cards were not saving progress. i think i might have even asked here in regards to it. anyway, i couldn't really find an answer so i i tried adding and removing them from groups and switching groups too. nothing. what i ended up doing is going into maker, loading up the card and then saving it as new. that seemed to work. progress saved. thing is that now that i downloaded new cards...it happens again. i don't know what causes that. i can make copies to solved the issue like i mentioned, but i lose the cool card art that creators use plus it's a hassle.
has anyone figured out what or why that happens? is there a way to KEEP or use the art on a New card?
yea it slows down the whole system because limiting the amount of lanes available to an extension card of any sort causes all sorts of side effects that are too technical to get into. It was explained to us at some point during our Computer Architecture courseI build a lot of pc's too, 8x hasnt ever effected performance that bad before, im still just confused as to why HS2 and AIS need so much bandwidth, because when i would hit 100% it wouldnt just cap off, it would actually slow down my whole system and stutter everything, i hope other people can find this fix too though, since its literally a hardware placement issue
Can someone link me the torrent for RX11. Thanks.
BetterRepack is uncensored.I'm new, how to remove censorship?
you just have to extract the first one. make sure that there is only one set of numbers at the end, as in, if theres a file that-s called something like "filename-204128-204128.part" rename it to "filename-204128.part" and then extract.can someone help me on hw to install multiple file?
One thing I would check is scaling on the models. Go to change appearance for the cards, and check to see if the invisible body parts are just scaled to zero. Scaling to zero makes body parts so small they aren't rendered.Wondering if someone might be able to give me some advice on a problem with the character cards that I've been having... Some (not all) of my characters have their bottom halves just completely missing (invisible). Everything from the waistline up is fine, but all body parts from below the waist are non-existent. Anyone else run into this? Have a fix for it?
Thanks in advance for any help!
-T
What tool did you use to extract? I found several (including WinZip, WinRAR, BreeZip) caused issues before finding that 7-Zip worked perfrectly and has done ever since.So i downloaded the torrent - on extraction there were loads of files corrupted - looked like they were mod files? Also what size is it extracted? playing it in bootcamp - so was just to ensure i have enough hard drive space (newbie to all of this..)
Also wondering if it is worth downloading - my i mac is a few years old....
I had 3d sex villa ages ago (like 10 years ago) and looking for a character creator game similar to it.
Thanks for any help