Jan 7, 2018
120
63
Thanks for your answers, TotalFluke. While I was reading your post, I thought about a couple of suggestions:

There's a few ways to restore some energy in specific situations, but an ability to restore energy at any point is too drastic a change. There will need to be some sort of limit to it, but then we are back to where we started just with a higher total stamina. Just work out more and get your endurance as high as it will go.
The nurse could sell a drug, but only one pill per week to avoid suspicion and if the MC takes two pills in the same day he'll od and lose one in-game week recovering. This way players won't abuse drugs (literally!) and at the same time they won't be forced to skip spicy situations because of low energy (typical examples from my saves: I forget I have a date; a beautiful lady decides to hit on me after a workout/swim).

You can visit another club and click the club name above and visit other rooms in that club, as long as they are public. You can't go into their main office or the kitchen or the locker rooms, for example.
Maybe, if a friend, girlfriend, family member... works at a rival club, he/she can give you access to the club when it's closed and/or to the private rooms. You could gather information on how the club is run, the people who work there, and even meet the janitor! :)
 
  • Like
Reactions: DyreMezza

Alexander_J

Newbie
Jul 3, 2024
16
17
Unfortunately the game doesn't work like that. Characters are not moved to locations until after you move. With 300+ active characters moving them all in every period would be a massive performance hit. (Those that work in the locations are moved there, I'm talking about the optional moves). When you move somewhere we then move a few characters so you are not there alone. (There's a bug that sometimes if you go back and forth between rooms in your club, each move adds more characters to each room).

Some characters, notably your girlfriend will also go to where you are so she can't move until after you do.
Thanks for the clarification. I had assumed that because when I save and reload, the characters in those locations don't change, that they are set when you open the map and then the game saves the info to lock them in.

But it does make a lot of sense. Opinions should play a part of how NPCs are allocated. So am I right in assuming that depending on a character's traits/opinions, they'll show up more often in certain places at certain times? Like say if they like to work out and they have a gym membership, they'll be at the gym more often than not? But if they like the outdoors, they are more likely to be at the park?
 

Fox.Mulder

Member
Jul 31, 2017
476
186
Is there a command that can set the date or begin certain storylines? Such as introducing family members at any time? Whenever I wanna test something related to those characters it's such a pain having to skip time 'til they show up haha. It's fine if not but would be useful.
 

rux

Newbie
Dec 17, 2017
17
33
Not sure if anyone else has run into this, but I think I found a bug. If you're having a threesome and one of the participants is pregnant (and they are showing the pregnant outfit), the game doesn't seem to recognize that they have other outfits during the event, so when they go to undress nothing happens. After a few times of this happening, the game just softlocks and you have to close the game window and restart.
 

jeaquedamez

Newbie
Jan 2, 2020
18
43
Is there a command that can set the date or begin certain storylines? Such as introducing family members at any time? Whenever I wanna test something related to those characters it's such a pain having to skip time 'til they show up haha. It's fine if not but would be useful.
I don't believe you can adjust the time in any way. When I wanted to speed up certain events I had to read through the tfl files to find the event and when they start and modify them that way. Check the monthly_pulse.tfl file. That tracks events to start showing up at the start of each month based on the number of months since the start of the game. So if you want the second sister to show up earlier you can adjust the line for her. This also shows you how you might be able to start certain story lines through the console but I haven't tried doing anything like that.
 
  • Like
Reactions: Fox.Mulder

ehesse

Newbie
Jan 6, 2018
92
33
Is there a command that can set the date or begin certain storylines? Such as introducing family members at any time? Whenever I wanna test something related to those characters it's such a pain having to skip time 'til they show up haha. It's fine if not but would be useful.
Change date 5400 or 5700 second char, 7200 third char. Gender depend on MC sex, sexual orientation.
Straight =bros+dad, gay=sis+sis+mom, bisexual mixed(reload save 2-3 days before).
MC under 40 years = sis-bro / mom-dad
MC over 40 years = son-daughter / sis-bro
Example=Male 42y bisexual
 
Last edited:

Varimatras

Member
Apr 29, 2017
171
171
hi
during a job interview, in the third stage, where the position and salary are selected, my current employees appear. I don't understand well why and what this affects, what they want and what to do?
thx
Change Log for version 1.09

[.........]

UI
* When making an offer to potential employee, it will show the thumbnails of up to 3 current employees in the similar jobs which you can then click on to check their salaries and skills.
That should clarify it. :)
 

ehesse

Newbie
Jan 6, 2018
92
33
For testing and future ideas.
After setting up name, age, sex orint., club name, first thing to do is to SAVE 11.
#1- Post for jobs, continue the char settings. In Contacs you can see all family members.
If you dont like it reload save 11, do #1 again until your OK with them.
Straight =bros+dad+uncle, gay=sis+sis+mom+aunt, bisexual mixed
MC under 40 years = sis/bro + mom/dad + uncle/aunt
MC over 40 years = son/daughter + sis/bro + cousin
The archive contain the original and modified files.
With the uncle/aunt/cousin you can play from first day.
Example=Female 22y bisexual:
 
Last edited:

Plover

New Member
Sep 12, 2019
9
6
There's a logged error causing pool games to quit unexpectedly.

Code:
RUN ERR in file '..\gamble.tfl:1632': Statement count exceeded (35000) [5869]
..\gamble.tfl:1632 [&gamble::play_game_pool:5869]([char]3,[char]61920,[s]Pool)
   char:P=[char]3, char:Q=[char]61920, $game_str=[s]Pool, $ans_p=[s]ok, $ans_q=[s]ok, $ans_n=[s]ok, $ans_o=[s]ok, $run_table=[i]0, $p_skill=[f]67.354, $q_skill=[f]33.049, $r=[f]97.302, $p_balls=[i]0, $q_balls=[i]0, $p_bstr=[i]0, $q_bstr=[i]0, $p_left=[f]0.000, $q_left=[f]3.000, $turn=[s]q, $board=[s]31.827,9.590,22.123/13.027,12.398,21.815/20.483,15.685,14.219/0,0,8.060, $ease=[f]0.318, $n_stat=[s]This is shot number 38. , $o_stat=[s]This is shot number 38. , $is_open=[i]0, $i=[i]0, $j=[f]38.000, $show_info=[i]0, $desc=[s]0%, 0%, 10%, $desc1=[s]38%, 0%, 32%, $desc2=[s]0%, 0%, 10%, $desc3=[s]25%, 9%, 13%, $desc4=[s]0%, 0%, 27%, $desc5=[s]16%, 54%, 12%, $desc6=[s]7%, 34%, 25%, $desc7=[s]0%, 0%, 21%, $desc8=[s]0%, 0%, 19%, $p=[f]38.295, $p1=[f]0.107, $p2=[f]0.301, $p3=[f]0.353, $p4=[f]-0.043, $p5=[f]0.466, $p6=[f]0.085, $p7=[f]0.072, $p8=[f]0.117, $best=[f]38.295, $x=[f]0.000, $y=[f]0.000, $z=[f]0.100, $shots=[scalar:s]HASH, $info=[scalar:s]HASH, char:W=[char]0, char:NT=[char]61920, char:OT=[char]3, $shot=[s]0,0,9.955
   R0=[b]false, R2=[f]0.318, R3=[f]33.049, R1=[b]true, R4=[f]67.354, R5=[f]3.000, R6=[f]0.000, R7=[s] shots=, R9=[i]0, R8=[s]38.295,0,31.827, R10=[s] p=, R12=[s] r=, R14=[i]2, R13=[f]97.302, R11=[f]38.295, R15=[f]-0.043, R16=[b]false, R17=[i]5, R18=[s]s5, R19=[f]0.466, R20=[b]false, R21=[i]6, R22=[s]s6, R23=[f]0.085, R24=[b]false, R25=[i]7, R26=[s]s7, R27=[f]0.072, R28=[b]false, R29=[i]8, R30=[s]s8, R31=[f]0.117, R32=[b]false, R35=[s]s1, R33=[s]s0, R34=[i]1

 

Tristin4857

Member
Oct 16, 2020
193
295
That's the monetary inflation mechanic at play, it just doesn't update the price on the button. The cost of PI services also goes up based on inflation
ive never used the PI, never figured out how, if i talk to her its just normal chats
 

Smellfire

Member
Sep 4, 2019
261
371
Quick questions:

4. Do the other clubs have some sort of unfair advantage at the beginning of the game? They always hire employees and build new rooms before my club. For instance, I don't know how many times it happened that my sister is hired as a bartender by a rival club and she didn't even tell me she was interested in the bartender job in my club.
They will if you stay passive. You can start building on day one. I Always build kitchen and storage room on day 1, and the rest as soon as available till you have the tier 1 building clots full. So dressing room, seating area, entrance and DJ booth. Also, if you want to hire your sister/daughter, you have to find her and meet her straight away and offer her a job. Probably have 30% chance of her NOT getting employed by another club. That's if she hasn't got one at the start anyway. If you must have your sister/daughter then either save scum, or restart again and again. Really could do with a mechanic that you can hire family straight away without an interview, just go to wages, if they are interested in the jobs you have available.

Biggest factor is wages, make sure the staff are unskilled, cheap as fuck, then read books and train them. You can out fame the other clubs if you do that, because you'll have 60-90 skills in no time. Shag all your staff to make them happy, become friends, then increase wages a bit every now and then. Happy days.
 

Smellfire

Member
Sep 4, 2019
261
371
Two more things, I don't know if they're a bugs:
1. If a NPC is hired as a janitor by a rival club, she's basically at work 24/7? Doesn't matter when you send them a text, they're always at work.
2. IIRC, the tutorial says there's no passing of time if you move around inside your own club but that's not true, e.g. if it's morning and you go office --> bar --> restroom --> office, it's noon. Quite a huge club :)

btw, is there a way to explore different room inside rival clubs?
1. No, they work till afternoon, free evening onwards.
2. You get so many moves. Its in the option on start screen, increase them yourself. Max actions per turn. Rival clubs have the same screen as yours, just move around the same, from room to room. Move count in rivals club to.
 
Aug 26, 2018
44
20
okay. I'm trying to input the console commands. buuuut. im struggling on how to to correctly input them. it keeps telling me
"ERROR: Command(X) could not ne found" it obvious that i'm typing it in wrong. I guess i'm not understating the notes that given in the files. can anyone please give me an example on what the command is supposed to look like when typing it in? for example if i wanted to set my strength to 100.
 
Sep 17, 2017
100
71
ive never used the PI, never figured out how, if i talk to her its just normal chats
Open the PI's character page, and hit the "send text" button on the top right. One of the options will be "I ask for X to come meet me. I may have a job", should be middle left of the texting options. Then they'll respond saying they can meet you the next morning in your office.
 
Aug 26, 2018
44
20
Thanks a lot for this file!
Anyone would know how to modify it to set the likes to NPC. I tried to modify it but I was just able to add a action button :-(
Thanks a lot for this file!
Anyone would know how to modify it to set the likes to NPC. I tried to modify it but I was just able to add a action button :-(
okay. I'm trying to input the console commands. buuuut. im struggling on how to to correctly input them. it keeps telling me
"ERROR: Command(X) could not ne found" it obvious that i'm typing it in wrong. I guess i'm not understating the notes that given in the files. can anyone please give me an example on what the command is supposed to look like when typing it in? for example if i wanted to set my strength to 100.
 
Sep 17, 2017
100
71
can anyone please give me an example on what the command is supposed to look like when typing it in? for example if i wanted to set my strength to 100.
cheat set_attr 3 stre 100
Your character will always be "3", and the stat names can be found either in the cheatsheet.txt or via the dump command ("dump p 3" without quotes for yourself, "list p" to see what everyone's assigned number is)
 
  • Like
Reactions: Cartageno
3.80 star(s) 27 Votes