Skyrim Patreon mods

[ThePinkMeerKat]

Does anyone have the patreon T3 version of

You must be registered to see the links

 

[hickups]

This is what I have been doing for a while and never had a problem.

View attachment 3240641

No need to do this anymore guys ditch Nemesis and FNIS and switch over to Pandora from Monitor144hz. it works with both Nemesis and FNIS anims

You must be registered to see the links

and remember to grab the XPMSE skeleton patch. It's still in Alpha and as i understand there're some minor missing features but i've yet to run into a single problem with it since the 1.0 release.

 

[Rasputeen]

Anyone have Kirax's Patreon Exclusive Female armors? Thanks in advance.

Just go on kemono and search kiraxx, the guy got like 3 different patreon page.

 

[PeacockSlayer]

Does anyone have the Simple But Elegant ( The Red Woman Dress) by PredatorRJ?

 

[fuchs11]

No need to do this anymore guys ditch Nemesis and FNIS and switch over to Pandora from Monitor144hz. it works with both Nemesis and FNIS anims

You must be registered to see the links

and remember to grab the XPMSE skeleton patch. It's still in Alpha and as i understand there're some minor missing features but i've yet to run into a single problem with it since the 1.0 release.

Confirmed it works! Thanks a lot!

 

[Mohawk32]

Asura066

This is what I mean when i said there is no collisions. I even edited the config to fix it but it did not work, But my old config just works.
View attachment 3239845

The editing needs to be done to the collision object in the .nif file for your character's body. Nothing you edit in config will help your collisions. Open the nif in Outfit Studio and inflate the collision mesh to the same size as your character's breasts, build the mesh in Bodyslide and that should help.

 

[Asura066]

Asura066

The editing needs to be done to the collision object in the .nif file for your character's body. Nothing you edit in config will help your collisions. Open the nif in Outfit Studio and inflate the collision mesh to the same size as your character's breasts, build the mesh in Bodyslide and that should help.

When you say edited the .nif you are refering to the .nif that comes with the race mod that I am using? What about the regulars npc, do i need to edited their .nif too?

 

[Asura066]

No need to do this anymore guys ditch Nemesis and FNIS and switch over to Pandora from Monitor144hz. it works with both Nemesis and FNIS anims

You must be registered to see the links

and remember to grab the XPMSE skeleton patch. It's still in Alpha and as i understand there're some minor missing features but i've yet to run into a single problem with it since the 1.0 release.

Does this work with combat animation too? What about paraglider? and creature combat animation?

 

[Asura066]

I do:
Run FNIS.
Move the output (everything in meshes except character folder) into a temporary folder.
Run Nemesis.
Move the output that you transferred into another folder, back into the FNIS+Nemesis Output meshes folder. It should overwrite everything except the character folder.

You're done.

I use both as well. On vortex

1. disable nemesis
2. Run fnis it will generate a fnis data folder
3. enable nemesis
4 disable fnis behavior
5.run nemesis
6. Enable fnis
7. Profit.

 

[hickups]

Does this work with combat animation too? What about paraglider? and creature combat animation?

It works with everything it was designed from the ground up to be a complete replacement for Nemesis and FNIS so you don't have to fiddle with the two to get them to work its a single button press and done you simply follow the same procedure as you would nemesis by selecting the various behavior patches, and it handles FNIS anims automatically, it's faster more convenient and a lot less headache, you dont even need to clear out your output file before every run either as an added bonus, once you have Pandora set up you have Zero reason to have either FNIS or Nemesis installed.

 

[piratkopiering]

It works with everything it was designed from the ground up to be a complete replacement for Nemesis and FNIS so you don't have to fiddle with the two to get them to work its a single button press and done you simply follow the same procedure as you would nemesis by selecting the various behavior patches, and it handles FNIS anims automatically, it's faster more convenient and a lot less headache, you dont even need to clear out your output file before every run either as an added bonus, once you have Pandora set up you have Zero reason to have either FNIS or Nemesis installed.

Does this work wit SL creature animations?

 

[Asura066]

It works with everything it was designed from the ground up to be a complete replacement for Nemesis and FNIS so you don't have to fiddle with the two to get them to work its a single button press and done you simply follow the same procedure as you would nemesis by selecting the various behavior patches, and it handles FNIS anims automatically, it's faster more convenient and a lot less headache, you dont even need to clear out your output file before every run either as an added bonus, once you have Pandora set up you have Zero reason to have either FNIS or Nemesis installed.

I tired using it but it does not work i get the msg

Pandora Mod 1 : Pandora Base (REQUIRED) - v.1.0.0
0 total animations added.

Launch finished in 0.54 seconds

Here is what I did. I installed the mod through vortex and ran the tool through vortex and that was the msg i got. I than tried to install it in skyrim data folder but got the same msg. I also do not see any on the patches only just one.
Any advice?

 

[Nsein]

Guys, I am kinda confused with the Hair mods from Dint. Do I need to use more than one or only the 350?

 

[Asura066]

Does this work wit SL creature animations?

I recomand you read this to know more

You must be registered to see the links

 

[hickups]

I tired using it but it does not work i get the msg

Pandora Mod 1 : Pandora Base (REQUIRED) - v.1.0.0
0 total animations added.

Launch finished in 0.54 seconds

Here is what I did. I installed the mod through vortex and ran the tool through vortex and that was the msg i got. I than tried to install it in skyrim data folder but got the same msg. I also do not see any on the patches only just one.
Any advice?

You have to set it up just like nemesis create an output file etc, i've only ever used it through Mod Organizer not familiar with the process for Vortex

 

[mirlidois]

Can you upload to an other DL platform please ? Seems Pixeldrain don't work correctly, can't dl on it

Here you go, i will just delete the older one first to put the newer instead if needed. I added december 2023 too.

You must be registered to see the links

 

[ItsJustRen]

I recomand you read this to know more

You must be registered to see the links

I remember that reddit post lmao, the Op's replies was really clownish.

 

[ItsJustRen]

Does this work wit SL creature animations?

Yes it works perfectly fine. The only downside to Pandora is the exact same as Nemesis' downside. It's that for mods like Thief, there are a small amount of animations that won't work such as the waitress one iirc, although these animations are nothing much honestly, like it's not any of the sex animations.

 

[vrajk]

No need to do this anymore guys ditch Nemesis and FNIS and switch over to Pandora from Monitor144hz. it works with both Nemesis and FNIS anims

You must be registered to see the links

and remember to grab the XPMSE skeleton patch. It's still in Alpha and as i understand there're some minor missing features but i've yet to run into a single problem with it since the 1.0 release.

Isn't the best time rn. Wait a bit. Until the mod is on beta.

 

[fuchs11]

I would wait a bit more. The new updated mess up with naughty voices and naughty voices is too relevant. At least for me.

You can use Naughty voices from Coldsun's girls

You must be registered to see the links