Unity Completed Honey Select 2 [DX R15] [Illusion]

[KobaNKVD]

A little late, don´t know if you found a solution for your request yet.

But when I was searching for a list of bone names in Advanced BoneMod I found this: "You gotta go to advanced bone mod settings in the char maker (right side, one of the four options). There you look for the "dan_s" bone. There you can adjust the x,y,z scale. Works with futa characters as well."

This bone affects dong and balls simultaneously, it works as you can see here

The bone cm_J_dan_f_top do the same, cm_J_dan100_00 affects only dong.

Thanks. I'm doing futanari mlp, is it possible for female personages to put balls?

 

[tcyz]

Anyone with knowledge on material editor know if there's a way to rearrange the order of the clothing they get rendered in? For example bringing a sock clothing over the bottom clothing.

Edit: Nevermind, I got it. Setting the render queue to a number lower than the object you want above will put it underneath it.

 

[Bks132]

So i got a Oculus Quest 2 and wanted to try the game in VR, i got everything needed(powefull pc, link cable, vr headset) but by launching it via SteamVR the Illusion logo appear, the music starts but i only see white all around, can someone help me?

 

[DrWho345]

Does anyone else have a Mac and play this? Any time I play it, I need to run it using Parallels Desktop, and I can never properly control the camera, I am not too sure what I am doing wrong. Some camera angles work, but not all of them.

I don't know if the camera is locked or if i am doing something wrong. I am using DX R8 update

 

[armageddon]

It may load slower, it may load faster, or it may not load at all. Well, that's not normal for me.
I thought maybe there are some secrets for a quick entry?

Their loading times have always been a pain in the a**, regardless of the internet connection quality.
In part is because the server sucks, in part because many images are more than 10mb png's, whereas ordinary websites have 200kb jpg's. Character cards are not fast-loading images meant for that.

 

[turbojoe]

in part because many images are more than 10mb png's, whereas ordinary websites have 200kb jpg's. Character cards are not fast-loading images meant for that.

Here I can´t agree, look at the F95 Card sharing thread: the people are dumping here megatons of MB screenshots and cards, but this site loads within seconds (mostly).
Well then, do go

 

[rick66428]

So the height settings are now under a universal plugin setting? Is there an individual height setting for men? Thank you

 

[rick66428]

Hi, another question, I downloaded a korean pack model cards, but they are using the next gen skin with the veins popping out and stuff. How do I choose a different skin? I tried in character customization to use different skin but it doesn't work. Thank you.

 

[turbojoe]

Hi, another question, I downloaded a korean pack model cards, but they are using the next gen skin with the veins popping out and stuff. How do I choose a different skin? I tried in character customization to use different skin but it doesn't work. Thank you.

The Veins stuff belongs to Hanmen NextGen Shader, you can decrease or turn them off in Material Editor with the VeinsOpacity Slider


Changing Skintype may need to choose the new Skin (and perhaps Bodyskin too), then save and reload to overtake

 

[verius13]

Keep getting this error message when trying to access the character creation:

[Error : Unity Log] NullReferenceException: Object reference not set to an instance of an object
Stack trace:
MoreAccessoriesAI.Patches.CvsA_Copy_Patches.GetCmpAccessoryList (CharaCustom.CvsA_Copy self) (at <db4935c4cab14971a4d537874221607e>:0)
(wrapper dynamic-method) CharaCustom.CvsA_Copy.DMD<CharaCustom.CvsA_Copy::<Start>b__19_17>(CharaCustom.CvsA_Copy,UniRx.Unit)
UniRx.Observer+Subscribe`1[T].OnNext (T value) (at <6a5636e29fd540fd9cc37924ccb63032>:0)
UniRx.Subject`1[T].OnNext (T value) (at <6a5636e29fd540fd9cc37924ccb63032>:0)
UniRx.Triggers.ObservableUpdateTrigger.Update () (at <6a5636e29fd540fd9cc37924ccb63032>:0)

Anyone know what the cause could be

 

[turbojoe]

Keep getting this error message when trying to access the character creation:

[Error : Unity Log] NullReferenceException: Object reference not set to an instance of an object
Stack trace:
MoreAccessoriesAI.Patches.CvsA_Copy_Patches.GetCmpAccessoryList (CharaCustom.CvsA_Copy self) (at <db4935c4cab14971a4d537874221607e>:0)
(wrapper dynamic-method) CharaCustom.CvsA_Copy.DMD<CharaCustom.CvsA_Copy::<Start>b__19_17>(CharaCustom.CvsA_Copy,UniRx.Unit)
UniRx.Observer+Subscribe`1[T].OnNext (T value) (at <6a5636e29fd540fd9cc37924ccb63032>:0)
UniRx.Subject`1[T].OnNext (T value) (at <6a5636e29fd540fd9cc37924ccb63032>:0)
UniRx.Triggers.ObservableUpdateTrigger.Update () (at <6a5636e29fd540fd9cc37924ccb63032>:0)

Anyone know what the cause could be

Well - I´m no Operator to be able to read your error message.
But I guess you need a new install

 

[CuNickel]

I don't know if this was answered before already, but is VR in the game by now? OP post doesn't have the Virtual Reality tag but according to FAQ it was supposed to added eventually by the dev. Since we're already at R8, I'd assume it would have either happened by now or probs won't happen anymore?

 

[drowsy]

Does anyone know the cause or solution to this problem?

I'm making changes to a character card, and generally can save the card and it loads back up fine. But when I try to change one thing in particular (angle of the eyebrow), the change doesn't register properly. Like, saving it seems to work fine, you can even see the change on the actual .png image, but when loading the card again the eyebrow has the old angle.

Actually, it says the correct new value in the editor slider. F.ex., it says "75", which is correct, but not actually displayed on the character. When I change the slider to 74 or 75 again, the actual eyebrow angle on the character "snaps" to that. But, again, after I save it, it still doesn't load with the proper angle on the character.

I can save/load eyebrow angle edits to other characters just fine. I have been editing this character for a long while, and earlier versions of the same card didn't have the problem.

 

[armageddon]

Here I can´t agree, look at the F95 Card sharing thread: the people are dumping here megatons of MB screenshots and cards, but this site loads within seconds (mostly).
Well then, do go

AFAIK the card sharing thread mostly uses thumbnails and then you download the real cards as links and attachments. Or simply smaller png's. When there are loooong pages with maaaany images that don't use links...I experience same Kenzato loading times

 

[Bang5Bang]

So i got a Oculus Quest 2 and wanted to try the game in VR, i got everything needed(powefull pc, link cable, vr headset) but by launching it via SteamVR the Illusion logo appear, the music starts but i only see white all around, can someone help me?

Do you have Virtual Desktop? That's how I play it with Quest. If not, I can see what's different going the link cable.

 

[D7oom17]

Hi guys , I just downloaded the game and tried to run it but not working just show black screen only nothing else , I tried the solutions in FAQ but still not working any one have idea how i can fix it ?

 

[turbojoe]

Hi guys , I just downloaded the game and tried to run it but not working just show black screen only nothing else , I tried the solutions in FAQ but still not working any one have idea how i can fix it ?

What did you download - Better Repack (actually R8)? Did you install in a top folder of your drive (WIN and the game don´t like deep Install pathes)?
Tried several resolutions or fullscreen/window mode?

 

[D7oom17]

What did you download - Better Repack (actually R8)? Did you install in a top folder of your drive (WIN and the game don´t like deep Install pathes)?
Tried several resolutions or fullscreen/window mode?

Thanks for your reply

I download all in one in first page
All-In-One (DX R7 Base Game Repack):

You must be registered to see the links

I tried to delete the game and extract without mods and its work , There any way to install the mods without i get the black screen?

 

[turbojoe]

Thanks for your reply

I download all in one in first page
All-In-One (DX R7 Base Game Repack):

You must be registered to see the links

I tried to delete the game and extract without mods and its work , There any way to install the mods without i get the black screen?

Sry, I´m a little confused. With the torrent file you have the option to download the game (Repack) and/or not the Studio Stuff


The BetterRepack is the game (activated in the picture), the Sideloader Modpack (here 73,3 GB) is ONLY for Studio and NOT for the game.
I don´t know a "All-In-One".
The Repack includes all mods u need for the game and are installed when u extract the BetterRepack. There are no extra Mods to extract for the game.
The game out of the Repack should run without troubles.
Start via InitSettings.exe, choose your resolution and DON´T activate GraphicsMod and DHH the same time.

By the way: the actually version of Repack is R8, but u can remain at R7 - its still good working.

 

[Neuronyx]

What is the Sideloader Modpack Studio for the Better Repack? Is it necessary to have studio at all or is it just additional content?