K'9

Newbie
Mar 12, 2021
17
7
Holy shit trying to build anything is a pain in the ass. Not only you pretty much have to use "ignore collision" cheat because otherwise good luck adding walls around your floors if you want to have a window or a doorway but the stairs

Man

The stairs

Its like there is literally no way of fitting them onto standard square floor and making another one above. There is simply no appropriately sized floor that can fit next to the stairs without either the floor or the stairs going off the 1st floor

EDIT: Oh great so partition walls cant be colored but edge walls can

What the fuck they have done here, this building system is pretty much unusable if you want to make a house/mansion/whatever by yourself. Nothing alligns, nothing fits, outside walls have different size than inside partition ones, there is no floor with hole to fit stairs and you have to use these small squared floors with edge that make the floor look quite retarded and even then the staircase railing will clip through.....I'm seriously losing my patience here
 
Last edited:

Justinof

Member
Sep 19, 2019
122
61
Thanks! Which updates you did to fix it? I mesmo, for me it shows up a few options, including: maps, sideloader mods, uncensor mods, etc
You need to download the Hotfix related to the missing BonesFramework.dll for solving your problem, all others stuff are updates.
 

Justinof

Member
Sep 19, 2019
122
61
Also, randomly, is there a way to make certain articles of clothing like gloves appear on one hand and not the other? Or does that have to be mapped into the clothjbg mod to begin with or something? Granted this is all for my desire to experiment...frankly im straight up elated the above issues were fixed.
Thanks again
Unfortunately it is not possible, clothes can have only 3 states: on, half on, off. The modder can decide how the half-on state is showing in game, could be half disrobed, partially trasparent or a mix. There are gloves that appears on one hand only (although very few) but they are 1 hand only in all the 3 states.
 

Justinof

Member
Sep 19, 2019
122
61
Holy shit trying to build anything is a pain in the ass. Not only you pretty much have to use "ignore collision" cheat because otherwise good luck adding walls around your floors if you want to have a window or a doorway but the stairs

Man

The stairs

Its like there is literally no way of fitting them onto standard square floor and making another one above. There is simply no appropriately sized floor that can fit next to the stairs without either the floor or the stairs going off the 1st floor

EDIT: Oh great so partition walls cant be colored but edge walls can

What the fuck they have done here, this building system is pretty much unusable if you want to make a house/mansion/whatever by yourself. Nothing alligns, nothing fits, outside walls have different size than inside partition ones, there is no floor with hole to fit stairs and you have to use these small squared floors with edge that make the floor look quite retarded and even then the staircase railing will clip through.....I'm seriously losing my patience here
I agree whit you about the missing parts, the clunky building sistem and the difficulty of alignments, but whit patience you can build some pretty mansions/houses nonetheless.
Here an example in my post #9803, and the house use collisions.
 

Deleted member 4113116

Well-Known Member
Aug 27, 2021
1,149
839
The Manager button for sure, the update button not seems to shows it.
Edit= let't cut the taurus head, as it is said in my country, get it from the attachment.
Thanks! So I just have to unzip it on mods folder and that's it?

Edit: I think I've figured it out! =D
 
Last edited:

Arathyum

New Member
Jan 2, 2022
8
3
Yep, i did as the mate above suggested which was also basically whay you said and now im A-ok. Many thanks guys, seriously appreciate it. I am curious though as to what the Additionalaccessories mod was for in the first place and why it was acting up...


Also, randomly, is there a way to make certain articles of clothing like gloves appear on one hand and not the other? Or does that have to be mapped into the clothjbg mod to begin with or something? Granted this is all for my desire to experiment...frankly im straight up elated the above issues were fixed.
Thanks again
About the clothing thing I dont know how
 

Zureth

Newbie
Game Developer
Apr 4, 2017
79
367
People I am again with a problem, apparently in some animations the girl disappears, in others not, with the camera controls I was able to detect that the girl goes off the map and remains in a position like a contortionist :LOL:, it was after updating the mods, any advice ? Thank you
AI.png Sin título.png
 
  • Like
Reactions: VentusLightOne

VioletFalcon

Newbie
May 20, 2021
95
99
Something got me thinking. Previously I found out that there's a survival mod, although it WAS used I'm sure the response I got said it was outdated and such, however that's not my point. All the big mods are for the studio and whatnot, but are there more mods for the main game? I'd absolutely love to see more content in the open world areas or just in general without essentially doing photo shoots lol
 
Dec 21, 2019
42
27
I downloaded this and opened it but whenever I attempt to change a face using a preset it looks like the face has a white sheet over it. (It's super nightmare fuel). Some of the accessories and clothing items are deformed and sink down into the floor etc.

Is this because the mods aren't correctly placed in the repack? What do I need to do to make everything work?
 

Justinof

Member
Sep 19, 2019
122
61
Question: it is possible to copy the 'chara' folder from the BR 10 version into BR 6 version folder? Will it crash the game or something?
It is possible, the only problem you could find is that some cards you made whit BR 10 have not the mods needed in BR R6, or the mods use an older version. Expect no crashes, only some readjustments to be done.
 

Deleted member 4113116

Well-Known Member
Aug 27, 2021
1,149
839
It is possible, the only problem you could find is that some cards you made whit BR 10 have not the mods needed in BR R6, or the mods use an older version. Expect no crashes, only some readjustments to be done.
I see, yeah I wanted to try doing that, because I could not use BR 10, it was very laggy for me, I'm using BR 6 and being able to play with 30fps (except when there are many things at the same time to load, like a lot of things in the house, more than one girl in the same area, etc), but I wanted to add more characters without screwing things up in the game
 

Justinof

Member
Sep 19, 2019
122
61
Does "GenderSwap" in changelog mean that we can change the gender of the npc characters to male?
I'm confused
I don't know what that plugin is made for, i can't find any infos about.
What i know is that in the game npcs can be only females or futanari, npcs can't play as the "giving" role when having sex.
The MC can be male or futanari and be the giver, or a female and in this case allowed to use only lesbian "active" roles.
 
  • Like
Reactions: Kilometer Immorales

Justinof

Member
Sep 19, 2019
122
61
I downloaded this and opened it but whenever I attempt to change a face using a preset it looks like the face has a white sheet over it. (It's super nightmare fuel). Some of the accessories and clothing items are deformed and sink down into the floor etc.

Is this because the mods aren't correctly placed in the repack? What do I need to do to make everything work?
For the deformation problem download the hotfix using the KKManager in the launcher, or get it from the post #10073.
For the white skin i suppose you are trying to use textures that requires the GraphicsMod enabled, this mod is incompatible whit DHH (another graphic mod), both mods can be enabled in the launcher, pick one or the other.
I suggest to use DHH only (it is easier to use) and use the skin textures that are compatibles.
 
Last edited:
3.40 star(s) 34 Votes