Bradd D
Member
- Oct 8, 2022
- 316
- 449
The October monthly excuse will be a rehash of the usual, more eye problems, hardware died, an anal prolapse, or some other unholy dogshit with the long awaited release almost ready and right around the corner. 
- Thread starter stencilbits
- Start date
Evil13
Engaged Member
- Jun 4, 2019
- 3,881
- 16,828
Oh you sweet summer child.
CalamarMaligno
Member
- Aug 16, 2019
- 155
- 349
To be fair they didn't say THIS Christmas.
Released 3 days early for members.
New
Another month passes, which means another monthly update! This post will be a pretty short one, as I have already discussed most of the important issues in previous posts. But let's go through the main issues quickly just in case.
My eyesight issues have been slowly getting better after the operation. There's still some occasionally blurred vision and eyestrain, but nothing too bad. The situation has been improving constantly, so even if I never get my full eyesight back things will look pretty good if nothing regresses. Fingers crossed.
As for Offcuts 0.4, I'll try to place the release in a slot that enables me to get fully back in continuing either with Offcuts 0.5 or a new project I have been planning for some time. It would be embarrassing to release 0.4 and then have to pause for a long time again. The other alternative for me is to also retire from this hobby after 0.4 is out if my eyesight can't take it, but hopefully that won't happen.
That's about all for now, feel free to check any previous updates if you want to gather more details. Things are looking pretty good for now and I also started to work on 3D renders again after my eyesight health adventure. My first, quick render in a while is attached to this post. I might be a bit rusty after the pause, but hopefully I'll get back into routine soon. Can't be too NSFW in a public Patreon news post either, but hopefully more hardcore stuff will follow soonish. That's about all for now, Happy Halloween!
As always, I'm not going to take any Patreon payments until Offcuts 0.4 is out (I'll temporarily suspend my Patreon at the end of each month until then). Thanks for your endless patience!
You must be registered to see the links
New
You must be registered to see the links
Another month passes, which means another monthly update! This post will be a pretty short one, as I have already discussed most of the important issues in previous posts. But let's go through the main issues quickly just in case.
My eyesight issues have been slowly getting better after the operation. There's still some occasionally blurred vision and eyestrain, but nothing too bad. The situation has been improving constantly, so even if I never get my full eyesight back things will look pretty good if nothing regresses. Fingers crossed.
As for Offcuts 0.4, I'll try to place the release in a slot that enables me to get fully back in continuing either with Offcuts 0.5 or a new project I have been planning for some time. It would be embarrassing to release 0.4 and then have to pause for a long time again. The other alternative for me is to also retire from this hobby after 0.4 is out if my eyesight can't take it, but hopefully that won't happen.
That's about all for now, feel free to check any previous updates if you want to gather more details. Things are looking pretty good for now and I also started to work on 3D renders again after my eyesight health adventure. My first, quick render in a while is attached to this post. I might be a bit rusty after the pause, but hopefully I'll get back into routine soon. Can't be too NSFW in a public Patreon news post either, but hopefully more hardcore stuff will follow soonish. That's about all for now, Happy Halloween!
As always, I'm not going to take any Patreon payments until Offcuts 0.4 is out (I'll temporarily suspend my Patreon at the end of each month until then). Thanks for your endless patience!
granny gumjobs
Member
- May 15, 2022
- 488
- 2,138
The other alternative for me is to also retire from this hobby after 0.4 is out if my eyesight can't take it, but hopefully that won't happen.
5 years and counting from the last update.
4 years and counting since it was "almost ready".
He has not retired from his hobby. He has passed retirement and went to dead as a door nail.
I'll try to place the release in a slot that enables me to get fully back in continuing
Nope. Failed before he even got to the starting line.
It would be embarrassing to release 0.4 and then have to pause for a long time again.
Not as embarrassing as making a copy/paste post for 5 years.
5 years and counting from the last update.
4 years and counting since it was "almost ready".
He has not retired from his hobby. He has passed retirement and went to dead as a door nail.
I'll try to place the release in a slot that enables me to get fully back in continuing
Nope. Failed before he even got to the starting line.
It would be embarrassing to release 0.4 and then have to pause for a long time again.
Not as embarrassing as making a copy/paste post for 5 years.
CalamarMaligno
Member
- Aug 16, 2019
- 155
- 349
Even stencilbits is losing hope on his own updates. Just release the damned thing and let the chips fall where they may!
- Aug 19, 2018
- 1,298
- 3,746
" As for Offcuts 0.4, I'll try to place the release in a slot that enables me to get fully back in continuing either with Offcuts 0.5 or a new project I have been planning for some time. "
That sentence right there tells you everything you need to know. Why release 4.0 when you can hold of til 5.0 , why release 5.0 when you can hold off until the new project. Why bother doing anything at all when you're already near 6 years into doing nothing at all.
That sentence right there tells you everything you need to know. Why release 4.0 when you can hold of til 5.0 , why release 5.0 when you can hold off until the new project. Why bother doing anything at all when you're already near 6 years into doing nothing at all.
Bradd D
Member
- Oct 8, 2022
- 316
- 449
My eyesight issues have been slowly getting better after the operation. There's still some occasionally blurred vision and eyestrain, but nothing too bad. The situation has been improving constantly, so even if I never get my full eyesight back things will look pretty good if nothing regresses. Fingers crossed.
BorgleButt
Newbie
- Apr 17, 2019
- 45
- 87
This really is the greatest game of all time...
Not Offcuts, the guessing game of what the excuse will be next month.
Not Offcuts, the guessing game of what the excuse will be next month.
TGafy
Well-Known Member
- May 14, 2020
- 1,009
- 1,196
This really is the greatest game of all time...
Not Offcuts, the guessing game of what the excuse will be next month.
Easy guessing game. He's using the same reasons from prior months.
CalamarMaligno
Member
- Aug 16, 2019
- 155
- 349
That's why we must outstencil the bits!
Then again current updates can be summarized as:
I was going blind, but not really.
Game update is done, but not really.
I'm workin' on it, but not really.
I may quit after this, but not really.
I'm ashamed of my tardiness, but not really.
Gustavous
Member
- May 12, 2020
- 102
- 125
Dude is taking so long that I went from a loser teen jerking off to hentai to travelling around the world as an sailor, and basically I''m hearing the same excuses before I got the job
Bradd D
Member
- Oct 8, 2022
- 316
- 449
It's not even funny anymore. Every month. Month after month. For the last 5 something years the release of the Kraken has been promised to the masses, only to keep posting garbage. That amount of stupid is palpable. But here we are 5 years later, and the adventure continues. It's just sad and dumb at this point.
I don't give a shit about this game anymore ... I don't even want it to release ... In fact, I want to see how long this circus can truly go on for. C'mon ladies and gentleman! I'm being serious, let's hope this hits the ten year mark! Here's to many more years of the funniest thread on the site!
RainMaker323
Member
- Jan 26, 2018
- 164
- 340
I don't know what's funnier - Trump getting a second term or stencilbits still putting out a monthly excuse.
The game has three full paths as it is. Polish and release as is. Then, if you have to, make an Offcuts 2.
Bradd D
Member
- Oct 8, 2022
- 316
- 449
Honestly, he should just repackage all the worthless dogshit he's posted on Patreon over the last 4 or 5 years and call that Offcuts.
TGafy
Well-Known Member
- May 14, 2020
- 1,009
- 1,196
All this time... Has anyone here looked up the definition of Offcuts? Seems fitting somehow.