- Jan 22, 2022
- 28
- 51
Tool Translator++
- Thread starter warshadow8791
- Start date
- Jan 22, 2022
- 28
- 51
- Nov 2, 2021
- 286
- 224
Yes. It does indeed use encryption. Here is the encryption key found: (294e3528ef334bd55367537ed3ba143d)
decryptor:
You must be registered to see the links
I'll see what's next
...only there is no sense in this, you can just view files: photos, sounds. As long as there is nothing needed
Last edited:
- Jan 22, 2022
- 28
- 51
- Nov 2, 2021
- 286
- 224
I'm completely lost)
google for hints..
Shame on me. Found a built-in decryptor
In general, not everything is so simple. I need to translate EVENTs, but soon I found it only through RPG maker. Or some other software. Unfortunately, I can't help anymore, I don't have time for it now (
Last edited:
- Jan 22, 2022
- 28
- 51
That's ok bro!Thx for everything you helped me! That was a pleasure conversation between you an me
.I'm having some troubles with modifying text in a WolfRPG game. Does anyone know what's going on?
For context, the text has already been translated. I'm making some slight modifications to wording, and using Translator++ is much easier than using WolfRPG's editor. Everything was progressing fine until I got to a specific entry whose text goes a line longer than the rest. Most of the text in this game only extends down four lines (including the name), however a few examples are five lines long. Here's what it looks like in game:
The problem arises when I try editing text with that many lines. Even replacing a single character messes things up. For example, I replaced one letter of the original text (Y_u instead of You):
Here's the result when I play the event in-game:
Yes, those images are in sequential order. The final line is made into a new message without a background that plays before the rest, and after that the actual message appears (missing the final line).
This issue doesn't seem to be one of formatting not being copied over correctly from the original text to the edit. To make sure this was not the problem, I even reverted the "_" back to an "o" which caused the event to play out normally again.
I should note that this issue occurred with all the five-line messages I tested.
To investigate this further, I opened the game up in the WolfRPG editor and examined the event in question. Normally, the event looks like this:
The string is contained in one line, immediately followed by the event call. But when I modify any part of the text in question, the event becomes this:
The final line of the text gets separated from the original string, and is added in as a message.
Modifying the string in the WolfRPG editor does solve the issue, however doing so is quite inefficient and does not maintain the integrity of the original translation file. Does anyone know how I might solve this issue within Translator++?
For context, the text has already been translated. I'm making some slight modifications to wording, and using Translator++ is much easier than using WolfRPG's editor. Everything was progressing fine until I got to a specific entry whose text goes a line longer than the rest. Most of the text in this game only extends down four lines (including the name), however a few examples are five lines long. Here's what it looks like in game:
The problem arises when I try editing text with that many lines. Even replacing a single character messes things up. For example, I replaced one letter of the original text (Y_u instead of You):
Here's the result when I play the event in-game:
Yes, those images are in sequential order. The final line is made into a new message without a background that plays before the rest, and after that the actual message appears (missing the final line).
This issue doesn't seem to be one of formatting not being copied over correctly from the original text to the edit. To make sure this was not the problem, I even reverted the "_" back to an "o" which caused the event to play out normally again.
I should note that this issue occurred with all the five-line messages I tested.
To investigate this further, I opened the game up in the WolfRPG editor and examined the event in question. Normally, the event looks like this:
The string is contained in one line, immediately followed by the event call. But when I modify any part of the text in question, the event becomes this:
The final line of the text gets separated from the original string, and is added in as a message.
Modifying the string in the WolfRPG editor does solve the issue, however doing so is quite inefficient and does not maintain the integrity of the original translation file. Does anyone know how I might solve this issue within Translator++?
While I haven't found a solution to this problem, I have found a workaround that has a minimal impact on the integrity of the translation file. From the very start of your project:
- Create a Translator++ project from the unmodified copy of the game (without you having made any edits)
- Go about modifying the text with Translator++ as you normally would
- When you reach text that is five lines long, do not change the text in Translator++. Instead, open the unmodified copy of the game in the WolfRPG editor
- Find the five-line text you need to modify, and directly alter the string in the WolfRPG editor
- Export your changes from the WolfRPG editor by selecting "File > Create Game Data"
- Continue modifying text in Translator++. When you are ready to "Inject / apply translation" in Translator++, set the source material as the modified WolfRPG game that you exported from the editor, and apply translation
I know this is a really minor issue with a fairly intuitive fix, but this is the only way I could think of to resolve the issue in as minimally invasive a manner as possible. I'm also keeping a log of all the changes I'm making in the form of a .docx file, so that even if the entries do not show up as being modified in Translator++ they can still be easily found in the log file. For an in-editor reflection of the changes made, I am also adding comments to the entries edited in WolfRPG editor noting what has been modified.
- Sep 1, 2020
- 338
- 235
Can anyone help me. I create another project because Idk why my recent project doesnt open and now this happens
Edit: Just realized my T++ auto updates should I go back to older version? When I reinstall T++ my old project worked
Edit: Just realized my T++ auto updates should I go back to older version? When I reinstall T++ my old project worked
Last edited:
- Nov 2, 2021
- 286
- 224
Didn't quite understand the problem. Regarding the version of the program - with TWO versions of programs open (old and new), two versions of the newer version actually work.
I can't say that this is your case.
However, start a new project, but don't save, but import data from the saved old project into it.
Select everything, then objects (bottom right).
If this method doesn't work. Very rare, but it happens. Then choose Translations (bottom left) the problem is that translations are mostly imported one at a time, step by step.
I need some help here. I just try using this tool but when I try to run the translated game it kept telling me that I'm missing a png file. Is there anything i can do to fix it ?
- Nov 2, 2021
- 286
- 224
Yes, you just accidentally translated the name of this png and you just need to put its name back)
Sorry for such a not very simple explanation, but that's exactly what it is and you need to find it and return the name
- Nov 2, 2021
- 286
- 224
- Sep 1, 2020
- 338
- 235
- Nov 2, 2021
- 286
- 224
- Nov 2, 2021
- 286
- 224
Download several versions of the translator, I recommend unpacking the first time the game with older versions. Then open this project with a newer version and translate, the new ones have some strange problems with the initial unpacking.
This is only my recommendation, not necessarily to execute.
Hello
Is it possible to set the program to translate by deepl or other translator does not make an extra space.
It translated the text as in the original.
this is a spreadsheet translation
text files are in .xml
Is my setting for changing the characters in the translation well, because sometimes the wrong translator does not see these characters
Is it possible to set the program to translate by deepl or other translator does not make an extra space.
It translated the text as in the original.
this is a spreadsheet translation
text files are in .xml
Is my setting for changing the characters in the translation well, because sometimes the wrong translator does not see these characters